Zoom MRS-4 Specifications download pdf (Page 60)

Reference [Track Editing]

ZOOM MRS-1608

Use the cursor up/down keys and the dial/

status keys to select the track/V-take to be

used as destination.

If you specify the same track/V-take as the source, the

harmony data will be added to the original data and the V-

take will be overwritten. You can also specify a stereo

track or two mono tracks as destination.

Press the [ENTER] key.

The display indication changes as follows. From this

screen, you can set the key to be used as reference for the

harmony.

Turn the dial to select the key.

The setting range is C - B (in semitone steps).

Use the cursor left/right keys to bring up

the indication “DUO HARM SCALE” on the

display. Then turn the dial to select the

scale type and the pitch shift direction. The

following settings are available.

• Maj Up:

Create harmony a major third up

• Min Up:

Create harmony a minor third up

• Maj Dn:

Create harmony a major third down

• Min Dn:

Create harmony a minor third down

Use the cursor left/right keys to bring up

the indication “FEELING” on the display.

Then turn the dial to select the speed with

which the created harmony will reach the

target pitch.

The setting range is 0 – 30. The larger the value, the

smoother the transition to the harmony.

Use the cursor left/right keys to bring up

the indication “SOURCE LVL” on the

display, and turn the dial to set the volume

for the edit source.

The setting range is 0 – 127. A setting of 100 results in an

unchanged level.

HINT

When the SOURCE LVL parameter is set to zero, the edit

source will be muted, and only the generated harmony is

written to the track.

To set the pan value for the edit source, use

the cursor left/right keys to bring up the

indication “SOURCE Pan” on the display,

and then turn the dial to adjust panning for

the source.

The setting range is L100 (fully left) - 0 (center) - R100

(fully right).

NOTE

When the destination is a mono track, the pan setting will

have no effect.

Adjust the level and panning for the

harmony part in the same way, by bringing

up the indication “CHORUS LVL” or

“CHORUS Pan” on the display.

Press the cursor down key to cause the

counter indication to ﬂash. Then use the

cursor left/right keys and the dial to specify

the start point for Duo Harmony generation.

You can also use the MARKER [

]/[

] keys, ZERO

[

] key, and REW [

]/FF [

] keys to locate the point.

The Duo Harmony part will be added to the range where

recording steps were carried out. By pressing the PLAY

[

] key at this point, you can check the editing result.

Key

DUO HARM

KEY

DUO HARM

SCALE

Maj Up

DUO HARM

FEELING

DUO HARM

SOURCE

LVL 100

DUO HARM

SOURCE

Pan 0

1608E.book 60 ページ２００４年４月１９日　月曜日　午前１０時４４分

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 223 224

Comments to this Manuals

No comments

Zoom MRS-4 Specifications Page 60

Comments to this Manuals

Related products and manuals for Recording Equipment Zoom MRS-4