Zoom MRS-4 Specifications Page 54
- Page / 224
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Reference [Track Editing]
ZOOM MRS-1608
54
Reversing a specified range of
audio data
You can reverse the order of a specified range of audio
data.
1.
Refer to steps 1 – 6 of “Basic steps for
range editing” to select the track/V-take for
reversing, and press the [ENTER] key.
The indication “Rvrs Src START” appears on the display.
2.
Use the cursor left/right keys to move the
flashing section of the counter, and turn the
dial to specify the reversing start point.
3.
Press the [ENTER] key.
The display indication changes to “Rvrs Src END”.
4.
Use the same procedure as in step 2 to
specify the reversing end point.
If you press the PLAY [
R
] key, the specified range will
be played.
5.
Press the [ENTER] key.
The indication “REVERSE SURE?” appears on the
display.
6.
To execute the reversing operation, press
the [ENTER] key.
When the reverse operation is completed, the unit returns
to the track edit menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
Changing the duration of a
specified range of data
You can change the duration of the specified range of
audio data on a track without changing the pitch (time
stretch/compress). The stretched or compressed data can
be written over the old data on the same track or pasted
on another track while leaving the source data
unchanged.
NOTE
• The editing start point for time stretch/compress is always
from the beginning of the V-take.
• The point where you stop playback when checking out the
time stretch/compress effect becomes the editing end point.
1.
Refer to steps 1 – 6 of “Basic steps for
range editing” to select the track/V-take for
time stretch/compress, and press the
[ENTER] key.
The indication “TmStrDst” appears on the display. In this
condition, you can select a track/V-take on which to place
the audio data after time stretch/compress.
2.
Use the cursor up/down keys and the dial
to select the destination track/V-take, and
press the [ENTER] key.
The display indication changes as follows.
This screen lets you specify the ratio for time stretch/
compress in two units, as listed below.
• Stretch ratio (%)
Expresses the length of the track after time stretch/
compress.
A B C D E E D C B A
Reverse
Rvrs Src
Rvrs Src
START
START
0 0
0
0
0
0
0
001
001
1
1
0
0
00
00
Rvrs Src
Rvrs Src
END
END
0 1
1
18
18
0
0
042
042
2
2
0
0
00
00
A B C D EA B C D E
Time stretch/compress
TmStrDst
TmStrDst
TR 1- 1
TR 1- 1
TimStrch
TimStrch
100.00%
100.00%
120.0
120.0
Stretch ratio Tempo
1608E.book 54 ページ ２００４年４月１９日 月曜日 午前１０時４４分
- Operation Manual 1
- USAGE AND SAFETY PRECAUTIONS 2
- Usage Precautions 3
- Introduction 7
- Recorder 10
- Rhythm section 10
- Introducing the MRS-1608 11
- Parts of the MRS-1608 12
- ZOOM MRS-1608 13
- Rear panel 14
- Front panel 14
- Connections 15
- Installing the CD-R/RW Drive 17
- Front Panel 18
- Power On/Off 19
- Listening to a Demo Song 20
- Let’s Record 21
- Quick Tour 22
- Lit in green 23
- Rhythm pattern number 23
- Rhythm pattern name 23
- When using the INPUT jack 25
- 2.3 Selecting a track and 26
- Step 3: Overdubbing 28
- Step 4: Mixing 29
- Track parameter list 30
- 4.3 Applying the send/return 31
- Step 5: Mixdown 33
- Reference [Recorder] 35
- Assigning V-take names 36
- Using scrub/preview 38
- Re-recording only a specified 39
- Using auto punch-in/out 40
- About the master track 41
- Master track mixdown steps 41
- Playing the master track 41
- RECTRACK 42
- REC TAKE 43
- Selecting drum/bass track as 44
- Recording 44
- About 8-track recording 45
- Setting a mark 46
- Locating a mark 47
- Deleting a mark 47
- The pre-count is turned off 48
- Reference [Track Editing] 49
- Copy source track 50
- Copy target track 50
- Move source track 51
- Move target track 51
- Trim Trim 52
- IN-1 IN-2 IN-3 53
- OUT-1 OUT-2 OUT-3 53
- Changing the duration of a 54
- PitchFix 55
- Source track 57
- Generate harmony 57
- KEY/SCALE = C Maj 59
- GTR 1- 1 61
- Erasing a V-take 62
- Copying a V-take 62
- Moving a V-take 63
- Exchanging V-takes 63
- Capturing a track 65
- “CAPTURE” appears 66
- Reference [Phrase Looping] 67
- Basic phrase loading steps 68
- Importing a phrase from the 69
- Adjusting phrase parameters 71
- You can use the PLAY [R 72
- Phrase A Phrase B 73
- Audio data 73
- Phrase C Phrase D 73
- Phrase 0 Phrase 1 Phrase 2 74
- (measure - beat) 76
- Reference [Mixer] 77
- • On condition 80
- •Off condition 80
- Saving a scene 84
- Recalling a scene 85
- Scene number 86
- Reference [Rhythm] 87
- Drum sequence 88
- Bass sequence 88
- Selecting a rhythm pattern 89
- Changing the tempo 89
- Changing the drum kit / bass 90
- Bass program number 91
- Pad bank number 91
- Preparations 93
- Drum sequence real-time input 94
- Bass sequence real-time input 95
- Drum sequence step input 96
- Quantize value 97
- Measure Beat Tick 97
- Bass sequence step input 98
- Quantize value Duration value 99
- Chord root 100
- Assigning a name to a rhythm 101
- Copying a rhythm pattern 102
- Deleting a rhythm pattern 103
- Selecting a rhythm song 103
- (measure number) 104
- (measure 105
- (0+1)x4+ 107
- Entering chord information 108
- Entering other information 109
- Copying a specified range of 111
- Copying a rhythm song 112
- Deleting the rhythm song 113
- Drum kit name 114
- Kit number 114
- GROUP=PL GROUP=MN 115
- Copying a drum kit 116
- Pad number 117
- Project name Project number 117
- SoundSel 118
- Changing the metronome volume 119
- Reference [Pad Sampler] 121
- Sample name 122
- Sample number 122
- Importing a WAV/AIFF file 124
- Copying a sample 126
- Deleting a sample 127
- Assigning samples to pads 129
- Copying a sampler program 131
- Deleting a sampler program 132
- Reference [Effects] 138
- Using the insert effect 139
- Current insert position 140
- Effect type 141
- Patch name Patch number 141
- Effect type name 144
- Setting value 144
- Patch number 145
- Insert effect 146
- Using the send/return effect 147
- Storing/swapping send/return 148
- When ALL was selected 149
- When PATCH was selected 149
- Reference [Creating a CD] 151
- Master track duration 152
- Creating an audio CD by album 153
- Using the marker function to 155
- Playlist number 156
- Number of tracks 158
- Playing time 158
- CDRW ERS 159
- READ DST 160
- _ (underscore) 161
- Disc number 163
- Project currently being saved 163
- Reference [Projects] 165
- Loading a project 166
- Creating a new project 166
- Checking the project size/ 167
- Duplicating a project 167
- Erasing a project 168
- Changing the project name 168
- Protecting a project 169
- Reference [MIDI] 170
- Making MIDI-related settings 171
- Turning Program Change 173
- Turning MIDI Time Code (MTC) 173
- Using the SMF player 174
- ChToDrum 175
- SMF playback 176
- Reference [Other Functions] 177
- Playlist playback 178
- Using the chromatic tuner 179
- Using other tuner types 180
- String numberTarget note for 181
- Tuner type 181
- (D PRTCT=ON) 182
- (D PRTCT=OFF) 182
- Basic maintenance procedure 184
- Returning system file data to 185
- Specifications 187
- Troubleshooting 188
- Problems with effects 189
- Problems with the rhythm 189
- Problems with MIDI 189
- Problems with CD-R/RW 190
- Other problems 190
- Appendix 191
- Type Parameter 194
- MIC algorithm 195
- DUAL MIC algorithm 196
- LINE algorithm 197
- Produces spatial width 200
- A resonance filter with LFO 200
- Send/return Effect 201
- Effect Patch 202
- 8x COMP EQ algorithm 206
- MASTERING algorithm 207
- Rhythm Pattern 209
- Drum Kits 211
- Bass Programs 211
- Instruments 212
- Category No. Name 212
- MIDI note number chart 214
- No. Name Comments 215
- MRS-1608 Hard Disk 217
- Contents 217
- Compatibility with MRS 217
- MIDI implementation 218
- MIDI implementation chart 219
- ZOOM CORPORATION 224
Related products and manuals for Recording Equipment Zoom MRS-4
(156 pages)
Recording Equipment Zoom R16 User Manual
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 0.714 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals