Zoom MRS-4 Specifications Page 15
- Page / 224
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
ZOOM MRS-1608
15
RL
MIDI
IN
MIDI
OUT
OPTICAL IN
Dynamic or condenser
microphones
Synthesizer or sampler etc.
AC adapter
Rear panel
MIDI sequencer
(computer etc.)
MIDI interface
CD Player etc.
Digital recorder
(MD recorder, DAT recorder, etc.)
Monitor system
(audio components or amplified
speakers etc.)
The signal from the LINE
INPUT jacks 7/8 is mixed
to that of the INPUT 7/8
jacks. For example, you
could connect a CD
player or similar here, or
use the input for the ef-
fect return of an external
effect. Adjust the output
level of the source so
that it causes no distor-
tion when used as an in-
put signal.
To supply +48V phantom power to
a condenser mic, connect the mic
to the INPUT 3/4 or 5/6 jacks and
set the corresponding [PHANTOM
ON/OFF] switch to ON.
When connecting stereo output devices such as a
synthesizer or CD player, connect the L output of the
external device to the odd-numbered INPUT jack
and the R output to the even-numbered INPUT jack.
The INPUT 1 – 8 jacks accept either XLR plugs or
mono phone plugs (balanced/unbalanced).
Loop the cable of the AC adaptor
around the hook as shown below
before connecting it to the [DC
12V] jack.
This will prevent the plug from
being pulled out if the AC adaptor
cable is accidentally pulled.
To prevent damage to the
speakers of your monitor
system, turn off the power
of the system connected
to the MASTER OUTPUT
jacks (or turn the volume
all the way down) before
you make connections.
Connections
Connect your instrument, microphone, audio devices, and MIDI devices as shown in the following diagram.
1608E.book 15 ページ ２００４年４月１９日 月曜日 午前１０時４４分
- Operation Manual 1
- USAGE AND SAFETY PRECAUTIONS 2
- Usage Precautions 3
- Introduction 7
- Recorder 10
- Rhythm section 10
- Introducing the MRS-1608 11
- Parts of the MRS-1608 12
- ZOOM MRS-1608 13
- Rear panel 14
- Front panel 14
- Connections 15
- Installing the CD-R/RW Drive 17
- Front Panel 18
- Power On/Off 19
- Listening to a Demo Song 20
- Let’s Record 21
- Quick Tour 22
- Lit in green 23
- Rhythm pattern number 23
- Rhythm pattern name 23
- When using the INPUT jack 25
- 2.3 Selecting a track and 26
- Step 3: Overdubbing 28
- Step 4: Mixing 29
- Track parameter list 30
- 4.3 Applying the send/return 31
- Step 5: Mixdown 33
- Reference [Recorder] 35
- Assigning V-take names 36
- Using scrub/preview 38
- Re-recording only a specified 39
- Using auto punch-in/out 40
- About the master track 41
- Master track mixdown steps 41
- Playing the master track 41
- RECTRACK 42
- REC TAKE 43
- Selecting drum/bass track as 44
- Recording 44
- About 8-track recording 45
- Setting a mark 46
- Locating a mark 47
- Deleting a mark 47
- The pre-count is turned off 48
- Reference [Track Editing] 49
- Copy source track 50
- Copy target track 50
- Move source track 51
- Move target track 51
- Trim Trim 52
- IN-1 IN-2 IN-3 53
- OUT-1 OUT-2 OUT-3 53
- Changing the duration of a 54
- PitchFix 55
- Source track 57
- Generate harmony 57
- KEY/SCALE = C Maj 59
- GTR 1- 1 61
- Erasing a V-take 62
- Copying a V-take 62
- Moving a V-take 63
- Exchanging V-takes 63
- Capturing a track 65
- “CAPTURE” appears 66
- Reference [Phrase Looping] 67
- Basic phrase loading steps 68
- Importing a phrase from the 69
- Adjusting phrase parameters 71
- You can use the PLAY [R 72
- Phrase A Phrase B 73
- Audio data 73
- Phrase C Phrase D 73
- Phrase 0 Phrase 1 Phrase 2 74
- (measure - beat) 76
- Reference [Mixer] 77
- • On condition 80
- •Off condition 80
- Saving a scene 84
- Recalling a scene 85
- Scene number 86
- Reference [Rhythm] 87
- Drum sequence 88
- Bass sequence 88
- Selecting a rhythm pattern 89
- Changing the tempo 89
- Changing the drum kit / bass 90
- Bass program number 91
- Pad bank number 91
- Preparations 93
- Drum sequence real-time input 94
- Bass sequence real-time input 95
- Drum sequence step input 96
- Quantize value 97
- Measure Beat Tick 97
- Bass sequence step input 98
- Quantize value Duration value 99
- Chord root 100
- Assigning a name to a rhythm 101
- Copying a rhythm pattern 102
- Deleting a rhythm pattern 103
- Selecting a rhythm song 103
- (measure number) 104
- (measure 105
- (0+1)x4+ 107
- Entering chord information 108
- Entering other information 109
- Copying a specified range of 111
- Copying a rhythm song 112
- Deleting the rhythm song 113
- Drum kit name 114
- Kit number 114
- GROUP=PL GROUP=MN 115
- Copying a drum kit 116
- Pad number 117
- Project name Project number 117
- SoundSel 118
- Changing the metronome volume 119
- Reference [Pad Sampler] 121
- Sample name 122
- Sample number 122
- Importing a WAV/AIFF file 124
- Copying a sample 126
- Deleting a sample 127
- Assigning samples to pads 129
- Copying a sampler program 131
- Deleting a sampler program 132
- Reference [Effects] 138
- Using the insert effect 139
- Current insert position 140
- Effect type 141
- Patch name Patch number 141
- Effect type name 144
- Setting value 144
- Patch number 145
- Insert effect 146
- Using the send/return effect 147
- Storing/swapping send/return 148
- When ALL was selected 149
- When PATCH was selected 149
- Reference [Creating a CD] 151
- Master track duration 152
- Creating an audio CD by album 153
- Using the marker function to 155
- Playlist number 156
- Number of tracks 158
- Playing time 158
- CDRW ERS 159
- READ DST 160
- _ (underscore) 161
- Disc number 163
- Project currently being saved 163
- Reference [Projects] 165
- Loading a project 166
- Creating a new project 166
- Checking the project size/ 167
- Duplicating a project 167
- Erasing a project 168
- Changing the project name 168
- Protecting a project 169
- Reference [MIDI] 170
- Making MIDI-related settings 171
- Turning Program Change 173
- Turning MIDI Time Code (MTC) 173
- Using the SMF player 174
- ChToDrum 175
- SMF playback 176
- Reference [Other Functions] 177
- Playlist playback 178
- Using the chromatic tuner 179
- Using other tuner types 180
- String numberTarget note for 181
- Tuner type 181
- (D PRTCT=ON) 182
- (D PRTCT=OFF) 182
- Basic maintenance procedure 184
- Returning system file data to 185
- Specifications 187
- Troubleshooting 188
- Problems with effects 189
- Problems with the rhythm 189
- Problems with MIDI 189
- Problems with CD-R/RW 190
- Other problems 190
- Appendix 191
- Type Parameter 194
- MIC algorithm 195
- DUAL MIC algorithm 196
- LINE algorithm 197
- Produces spatial width 200
- A resonance filter with LFO 200
- Send/return Effect 201
- Effect Patch 202
- 8x COMP EQ algorithm 206
- MASTERING algorithm 207
- Rhythm Pattern 209
- Drum Kits 211
- Bass Programs 211
- Instruments 212
- Category No. Name 212
- MIDI note number chart 214
- No. Name Comments 215
- MRS-1608 Hard Disk 217
- Contents 217
- Compatibility with MRS 217
- MIDI implementation 218
- MIDI implementation chart 219
- ZOOM CORPORATION 224
Related products and manuals for Recording Equipment Zoom MRS-4
(156 pages)
Recording Equipment Zoom R16 User Manual
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 1.327 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals