Zoom MRS-4 Specifications Page 189
- Page / 224
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Troubleshooting
ZOOM MRS-1608
189
◆
Insert effect cannot be inserted
When the 8x COMP EQ algorithm is selected, the
selection of insert points is limited (
→
p. 140).
◆
Insert effect does not apply
• Make sure that the [BYPASS/TUNER] key is out.
• Make sure that the insert effect is sent to the desired
location (
→
p.140).
◆
Send/return effect does not apply
• Make sure that the [CHORUS/DELAY] or [REVERB]
key is lit. If it is out, press the key several times to make
it light.
• Make sure that the send level for each track is raised (
→
p. 80).
◆
Cannot hear the rhythm pattern playback
• Make sure that the [DRUM]/[BASS] status keys are lit
in green.
• Make sure that the [DRUM]/[BASS] faders are raised.
If the faders are already raised, lower them and then
raise them once more.
• Make sure that you have not selected a blank rhythm
pattern (pattern name “EMPTY”).
• Make sure which is selected as playback sound, a drum
kit/bass program, or the pad sampler. A sound that is
not selected will not play.
• If the pad sampler is selected as playback sound, make
sure that samples are assigned to the pads.
◆
Cannot hear the rhythm song play back
• In the case of a new project, all rhythm songs will be
empty, so you will hear no sound. Either create a new
rhythm song, or load a project for which a rhythm song
has been created.
• When using Control Change signals sent from an
external MIDI device, the drum or bass volume may be
lowered. Set the MIDI channels for drum and bass to
OFF or check the setting at the external MIDI device.
◆
No sound when you tap the pads
If the pad sensitivity has been set to “SOFT”, loud sounds
will not be produced even when you tap the pad strongly.
Change the pad sensitivity setting (
→
p. 120).
◆
Cannot record or edit a rhythm pattern/
rhythm song
• When the [RHYTHM] key is out or blinking, it is not
possible to record or edit a rhythm pattern or rhythm
song. Press the [RHYTHM] key so that the key is lit.
• If the display indicates “SEQ FULL”, the rhythm
section memory has been used to maximum capacity.
Delete unneeded rhythm patterns to free up memory.
◆
Sounds recorded in the rhythm pattern do not
play
Sounds that exceed the maximum polyphony (24 sounds
for drum kit + bass program; 24 sounds for pad sampler)
will not be played. Either delete some of the notes that
have been recorded, or stay within the maximum
polyphony when you record.
◆
Cannot play pad sampler
When an empty sampler program was selected, no
samples will be assigned to the pads. Select one of the
preset sampler programs.
◆
Cannot add samples to pad sampler
If the display indicates “SPL FULL”, the pad sampler
memory has been used to maximum capacity. Delete
unneeded samples to free up memory.
◆
The MRS-1608’s drum kit/bass program
sounds cannot be played from external MIDI
device
• Make sure that the MIDI cable is correctly connected
from the MIDI OUT connector of the external device to
the MRS-1608’s MIDI IN connector.
• Make sure that the MIDI send channels of the external
device match the MIDI receive channels for drum kit/
bass program at the MRS-1608.
• During rhythm pattern step input, an external MIDI
device cannot be used.
◆
Cannot synchronize with external MIDI device
• Make sure that the MIDI cable is correctly connected
from the MIDI OUT connector of the MRS-1608 to the
MIDI IN connector of the external device.
• Synchronization with an external MIDI device is only
possible by using the MIDI clock or MTC output from
the MRS-1608. The MRS-1608 cannot synchronize to
a MIDI clock or MTC supplied by an external device.
• When synchronizing on the timing clock (MIDI clock),
make sure that output is enabled for Timing Clock,
Song Position Pointer, and Start/Stop/Continue
Problems with effects
Problems with the rhythm
section
Problems with MIDI
1608E.book 189 ページ ２００４年４月１９日 月曜日 午前１０時４４分
- Operation Manual 1
- USAGE AND SAFETY PRECAUTIONS 2
- Usage Precautions 3
- Introduction 7
- Recorder 10
- Rhythm section 10
- Introducing the MRS-1608 11
- Parts of the MRS-1608 12
- ZOOM MRS-1608 13
- Rear panel 14
- Front panel 14
- Connections 15
- Installing the CD-R/RW Drive 17
- Front Panel 18
- Power On/Off 19
- Listening to a Demo Song 20
- Let’s Record 21
- Quick Tour 22
- Lit in green 23
- Rhythm pattern number 23
- Rhythm pattern name 23
- When using the INPUT jack 25
- 2.3 Selecting a track and 26
- Step 3: Overdubbing 28
- Step 4: Mixing 29
- Track parameter list 30
- 4.3 Applying the send/return 31
- Step 5: Mixdown 33
- Reference [Recorder] 35
- Assigning V-take names 36
- Using scrub/preview 38
- Re-recording only a specified 39
- Using auto punch-in/out 40
- About the master track 41
- Master track mixdown steps 41
- Playing the master track 41
- RECTRACK 42
- REC TAKE 43
- Selecting drum/bass track as 44
- Recording 44
- About 8-track recording 45
- Setting a mark 46
- Locating a mark 47
- Deleting a mark 47
- The pre-count is turned off 48
- Reference [Track Editing] 49
- Copy source track 50
- Copy target track 50
- Move source track 51
- Move target track 51
- Trim Trim 52
- IN-1 IN-2 IN-3 53
- OUT-1 OUT-2 OUT-3 53
- Changing the duration of a 54
- PitchFix 55
- Source track 57
- Generate harmony 57
- KEY/SCALE = C Maj 59
- GTR 1- 1 61
- Erasing a V-take 62
- Copying a V-take 62
- Moving a V-take 63
- Exchanging V-takes 63
- Capturing a track 65
- “CAPTURE” appears 66
- Reference [Phrase Looping] 67
- Basic phrase loading steps 68
- Importing a phrase from the 69
- Adjusting phrase parameters 71
- You can use the PLAY [R 72
- Phrase A Phrase B 73
- Audio data 73
- Phrase C Phrase D 73
- Phrase 0 Phrase 1 Phrase 2 74
- (measure - beat) 76
- Reference [Mixer] 77
- • On condition 80
- •Off condition 80
- Saving a scene 84
- Recalling a scene 85
- Scene number 86
- Reference [Rhythm] 87
- Drum sequence 88
- Bass sequence 88
- Selecting a rhythm pattern 89
- Changing the tempo 89
- Changing the drum kit / bass 90
- Bass program number 91
- Pad bank number 91
- Preparations 93
- Drum sequence real-time input 94
- Bass sequence real-time input 95
- Drum sequence step input 96
- Quantize value 97
- Measure Beat Tick 97
- Bass sequence step input 98
- Quantize value Duration value 99
- Chord root 100
- Assigning a name to a rhythm 101
- Copying a rhythm pattern 102
- Deleting a rhythm pattern 103
- Selecting a rhythm song 103
- (measure number) 104
- (measure 105
- (0+1)x4+ 107
- Entering chord information 108
- Entering other information 109
- Copying a specified range of 111
- Copying a rhythm song 112
- Deleting the rhythm song 113
- Drum kit name 114
- Kit number 114
- GROUP=PL GROUP=MN 115
- Copying a drum kit 116
- Pad number 117
- Project name Project number 117
- SoundSel 118
- Changing the metronome volume 119
- Reference [Pad Sampler] 121
- Sample name 122
- Sample number 122
- Importing a WAV/AIFF file 124
- Copying a sample 126
- Deleting a sample 127
- Assigning samples to pads 129
- Copying a sampler program 131
- Deleting a sampler program 132
- Reference [Effects] 138
- Using the insert effect 139
- Current insert position 140
- Effect type 141
- Patch name Patch number 141
- Effect type name 144
- Setting value 144
- Patch number 145
- Insert effect 146
- Using the send/return effect 147
- Storing/swapping send/return 148
- When ALL was selected 149
- When PATCH was selected 149
- Reference [Creating a CD] 151
- Master track duration 152
- Creating an audio CD by album 153
- Using the marker function to 155
- Playlist number 156
- Number of tracks 158
- Playing time 158
- CDRW ERS 159
- READ DST 160
- _ (underscore) 161
- Disc number 163
- Project currently being saved 163
- Reference [Projects] 165
- Loading a project 166
- Creating a new project 166
- Checking the project size/ 167
- Duplicating a project 167
- Erasing a project 168
- Changing the project name 168
- Protecting a project 169
- Reference [MIDI] 170
- Making MIDI-related settings 171
- Turning Program Change 173
- Turning MIDI Time Code (MTC) 173
- Using the SMF player 174
- ChToDrum 175
- SMF playback 176
- Reference [Other Functions] 177
- Playlist playback 178
- Using the chromatic tuner 179
- Using other tuner types 180
- String numberTarget note for 181
- Tuner type 181
- (D PRTCT=ON) 182
- (D PRTCT=OFF) 182
- Basic maintenance procedure 184
- Returning system file data to 185
- Specifications 187
- Troubleshooting 188
- Problems with effects 189
- Problems with the rhythm 189
- Problems with MIDI 189
- Problems with CD-R/RW 190
- Other problems 190
- Appendix 191
- Type Parameter 194
- MIC algorithm 195
- DUAL MIC algorithm 196
- LINE algorithm 197
- Produces spatial width 200
- A resonance filter with LFO 200
- Send/return Effect 201
- Effect Patch 202
- 8x COMP EQ algorithm 206
- MASTERING algorithm 207
- Rhythm Pattern 209
- Drum Kits 211
- Bass Programs 211
- Instruments 212
- Category No. Name 212
- MIDI note number chart 214
- No. Name Comments 215
- MRS-1608 Hard Disk 217
- Contents 217
- Compatibility with MRS 217
- MIDI implementation 218
- MIDI implementation chart 219
- ZOOM CORPORATION 224
Related products and manuals for Recording Equipment Zoom MRS-4
(156 pages)
Recording Equipment Zoom R16 User Manual
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 1.533 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals