Zoom MRS-4 Specifications download pdf (Page 153)

Reference [Creating a CD]

ZOOM MRS-1608

153

To carry out the write process, press the

[ENTER] key once more.

By pressing the [EXIT] key instead of the [ENTER] key,

you can cancel the operation and back up one step at a

time.

During the write process, the indication “wait...” is shown

on the display. The counter indicates the progress status

of the write process. When writing is complete, the

display shows “CD Trkxx COMPLETE” (where xx is the

track number).

To return to the main screen, press the

[EXIT] key several times.

By repeating steps 2 – 8, you can add audio data to the

disc.

HINT

• When adding tracks, a blank of 2 seconds will automatically

be inserted between tracks on the disc.

• As long as the ﬁnalizing operation has not been performed,

the CD-R/RW disc cannot be played on an ordinary CD player.

(For information on how to play an unﬁnalized CD-R/RW disc

on the MRS-1608, refer to page 157.)

Creating an audio CD by album

This method involves creating a list for the audio CD

(called an “album”) which combines multiple projects

saved on the hard disk. The CD-R/RW disc is then written

in a single operation. With this method, the disc will be

automatically ﬁnalized.

When recording by album, the V-take last selected for the

master track of each project will be selected as source

material.

There are two methods for recording by album:

●

Track-at-once (TAO)

The master track of each project selected for the album is

written in a separate operation. When a CD-R written

with track-at-once is played on a CD player, a pause of 2

seconds will occur between tracks.

●

Disc-at-once (DAO)

The master tracks of all projects selected for the album

are written in a single operation. When a CD-R written

with disc-at-once is played on a CD player, there will be

no pause between tracks. If necessary, you can use marks

set in the project as PQ subcode information (specifying

track start/stop position and other items) to split up a

single project into multiple tracks.

HINT

You can include playlist information created with the

sequence play function in the album (

→

p. 156).

NOTE

Before starting the procedure, use the trimming function on

the V-takes to be used as source material.

Insert a CD-R/RW disc into the integrated

CD-R/RW drive.

Use a blank CD-R/RW disc or a CD-RW disc that has

been completely erased.

Verify that the V-takes you want to use for

the audio CD are selected for the master

tracks of the projects.

From the main screen, press the [CD-R/

RW] key in the control section.

The CD-R/RW menu appears.

Verify that “CD-R/RW AUDIO CD” is shown

on the display and press the [ENTER] key.

The display indication changes as follows.

Use the cursor left/right keys to bring up

the indication “AUDIO CD ALBUM” on the

display, and press the [ENTER] key.

In this condition, you can select the write method.

CD Trk01

SURE?

0 3

320

AUDIO CD

BURN CD

ALBUM

BurnType

DAO

1608E.book 153 ページ２００４年４月１９日　月曜日　午前１０時４４分

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 223 224

Zoom MRS-4 Specifications Page 153

Comments to this Manuals

Zoom MRS-4 Specifications Page 153

Comments to this Manuals

Related products and manuals for Recording Equipment Zoom MRS-4