Zoom MRS-4 Specifications download pdf (Page 146)

Reference [Effects]

ZOOM MRS-1608

146

Applying the insert effect only to

the monitor signal

Normally, when the insert effect is applied to the input

mixer, the signal processed by the effect will be recorded on

the track. If necessary, however, you can apply the insert

effect only to the monitor signal, and record the unprocessed

input signal on the track. For example when recording the

unprocessed sound of a vocal performance, the vocalist may

be more comfortable singing if an insert effect suitable for

mic recording is applied to the monitor signal.

Set the insert effect position to the input

mixer.

At the main screen, press the [UTILITY/

TRACK EDIT] key in the display section.

The indication “UTILITY TR EDIT” appears on the display.

Use the cursor left/right keys to bring up the

indication “UTILITY REC SRC” on the display,

and press the [ENTER] key.

The display indication changes as follows.

You can now select one of the following two signal types to

be recorded on the track.

●

WET

The input signal that has passed through the insert effect will

be recorded on the track (default setting).

●

DRY

Only the unprocessed input signal will be recorded on the

track. Even in this case, however, the insert effect will be

applied to the signal appearing at the MASTER OUTPUT

jacks.

Turn the dial to change the setting to “DRY”.

When you have ﬁnished adjusting settings,

press the [EXIT] key several times.

The unit returns to the main screen.

NOTE

The “UTILITY REC SRC” setting is stored for each project.

Before you begin recording other parts, be sure to change the

setting back to “WET”.

INPUT

Insert effect

Recorder

UTILITY

TR EDIT

REC SRC

WET

1608E.book 146 ページ２００４年４月１９日　月曜日　午前１０時４４分

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 223 224

Comments to this Manuals

No comments

Zoom MRS-4 Specifications Page 146

Comments to this Manuals

Related products and manuals for Recording Equipment Zoom MRS-4