Zoom MRS-4 Specifications download pdf (Page 82)

Reference [Mixer]

ZOOM MRS-1608

In the MRS-1608, the parameters of adjacent odd-

numbered/even-numbered mono tracks (1/2, 3/4, 5/6,

7/8) can be linked, resulting in a pair of stereo tracks.

(This function is referred to as “stereo link”.) The setting

procedure is as follows.

Press any key in the track parameter

section.

Press the status key of one of the mono

tracks that you want to stereo-link.

Repeatedly press the cursor down key, until

the following indication appears.

This is the STEREO LINK parameter screen.

Turn the dial to switch the setting ON.

Stereo linking will be enabled immediately, so that the

selected track and the adjacent odd-numbered/even-

numbered track are linked. To defeat stereo linking,

return the setting to OFF.

To return to the main screen, press the

[EXIT] key.

HINT

•To adjust the volume of stereo-linked tracks, use the odd-

numbered fader. (The even-numbered fader will have no

effect.)

• The PAN parameter of two stereo-linked tracks will function as

a balance parameter that adjusts the volume balance

between the tracks.

• Also when stereo-link is on, the phase parameter and V-take

selection parameter can be set individually for each track.

In the default condition of a project, the STEREO SUB-

OUT jack carries the same signal as the MASTER

OUTPUT jacks. Therefore it can be used as an extra

headphone jack. If required, the signal level and panning

of the signal sent to the STEREO SUB-OUT jack can be

controlled individually for each input or track, creating a

mix that is different from that of the MASTER OUTPUT

jacks. This is convenient to create a monitoring mix or to

send only the signal from a speciﬁc track/input to an

external effect.

HINT

• For the audio tracks and drum/bass track, the signal

immediately before the fader is sent to the STEREO SUB-OUT

jack.

• For inputs 1 – 8, the signal after the [REC LEVEL] control is

sent to the STEREO SUB-OUT jack.

Connect a monitor system or external

effect to the STEREO SUB-OUT jack.

Use the [STEREO SUB-OUT] control to adjust the signal

at the STEREO SUB-OUT jack to a suitable level.

HINT

For connection to a system with stereo inputs, use a Y cable

(stereo plug x 1 + mono plug x 2). If you connect the two

mono plugs of the Y cable to separate effects, the STEREO

SUB-OUT jack functions as two AUX OUT jacks. In this case,

you can set the panning value of the signal sent from the

track/input to the STEREO SUB-OUT jack fully to L or R to

select the send target.

Press the [MASTER] status key and then

the [SUB-OUT SEND] key in the track

parameter section.

The indication “MASTER SUB SEND” appears on the

display.

In the default condition of a project, the master track

SUB-OUT SEND ON/OFF parameter is ON, so that the

STEREO SUB-OUT jack carries the same signal as the

MASTER OUTPUT jacks.

In this condition, the signal from other tracks or inputs

cannot be sent directly to the STEREO SUB-OUT jack.

Linking two tracks

(stereo link)

TR7

ST LINK

OFF

Assigning an input/track

signal to the SUB-OUT jack

1608E.book 82 ページ２００４年４月１９日　月曜日　午前１０時４４分

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 223 224

Zoom MRS-4 Specifications Page 82

Comments to this Manuals

Zoom MRS-4 Specifications Page 82

Comments to this Manuals

Related products and manuals for Recording Equipment Zoom MRS-4