Reference [Other Functions]
ZOOM MRS-1608
180
5.
Adjust the pitch until the “<>” indication
encloses the desired note.
6.
To change the reference pitch of the tuner,
turn the dial during tuner operation.
The reference pitch of the tuner is set to center A = 440
Hz by default. The reference pitch can be adjusted over
the range of 435 – 445 Hz, in 1-Hz steps. When the value
was changed, the original display will return after a
while.
HINT
• The reference pitch selected here will remain in effect until you
return the setting to the original value.
• When you change the reference pitch of the tuner, the pitch of
the rhythm section bass program will also change
accordingly.
• The reference pitch setting is saved individually for each
project.
7.
When you have finished using the tuner
function, press the [EXIT] key.
The tuner is turned off, and the insert effect and send/
return effect will revert to the original condition.
Using other tuner types
The MRS-1608 allows various other tuner types besides
chromatic tuning, including standard tuning for guitar
and bass, and various special tuning functions.
For these types it is necessary to first select a string
number and then tune the strings one by one.
1.
Connect the guitar or bass that you want to
tune to one of the GUITAR/BASS INPUT
jacks 1/2. Press the [ON/OFF] key for the
input to which the instrument is connected,
so that the key is lit in red.
2.
Press the [TUNER] key in the effect section,
and use the cursor left/right keys to select
the tuner type.
While the tuner function is active, the cursor left/right
keys serve to switch the tuner type. Tuner types and notes
for each string are listed in the table below.
> A
> A
>>A
>A
<A >
A <
A <<
A <
A <
Pitch is flat
Correct pitch
Pitch is sharp
CALIB
440Hz
Tuner type GUITAR BASS OPEN A OPEN D OPEN E OPEN G DADGAD
String number/note name
String1 EGEDEDD
String2 B D C# ABBA
String3 G A A F# G# G G
String4 DEEDEDD
String5 ABAABGA
String6 E EDEDD
String7 B
1608E.book 180 ページ 2004年4月19日 月曜日 午前10時44分
Comments to this Manuals