Zoom MRS-4 Specifications Page 124

  • Download
  • Add to my manuals
  • Print
  • Page
    / 224
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 123
Reference [Pad Sampler]
ZOOM MRS-1608
124
5.
Press the [ENTER] key.
The display indication changes as follows.
6.
Specify the end point in the same way as in
step 4.
If you press the PLAY [R
] key at this point, the range
between the specified start and end points is played.
7.
When the import source has been
specified, press the [ENTER] key.
The indication “IMPORT SURE?” appears on the
display.
8.
To carry out the import process, press the
[ENTER] key once more.
When the import process is completed, the unit returns to
the sample selection screen. By pressing the [EXIT] key
instead of the [ENTER] key, you can cancel the operation
and back up one step at a time.
Importing a WAV/AIFF file
You can import an audio file (WAV/AIFF) from a CD-
ROM or CD-R/RW disc inserted in the CD-R/RW drive
or from the internal hard disk.
Before doing this, the following preparations are
necessary.
When importing from the CD-R/RW drive
Insert a CD-ROM or CD-R/RW disc containing audio
files into the CD-R/RW drive.
When importing from the internal hard
disk
Copy the audio files from a computer into a folder named
“WAV_AIFF” immediately under the root directory (top
level folder) of the internal hard disk.
The files must have the extension “.WAV” (for WAV files)
or “.AIF” (for AIFF files).
NOTE
•To copy audio files to the internal hard disk, the optional UIB-
02 card is necessary. For information on using the option card,
see page 183.
Any subfolders in the WAV_AIFF folder are not recognized by
the MRS-1608.
The following procedure will not allow you to first listen to the
audio files. Confirm file content and file name before you start
the procedure.
1.
Refer to steps 1 – 7 of “Basic steps for
sample importing” to bring the indication
“WAV/AIFF” onto the display. Then press
the [ENTER] key.
The display now shows “IMPORT CD-ROM”, and you
can select the source device.
2.
Use the cursor left/right keys to select the
source device: “CD-ROM” (CD-R/RW drive)
or “IntHDD” (internal hard disk), and press
the [ENTER] key.
The unit searches for WAV/AIFF files on the specified
device. When files are found, their names are listed on the
display.
HINT
If you select CD-ROM as source without a disc in the drive,
the indication “IMPORT Ins Disc” appears on the display and
the tray of the CD-R/RW drive opens. To continue, insert a
disc containing audio files and press the [ENTER] key.
3.
Turn the dial to select the audio file to
import.
When accessing a disc in the CD-R/RW drive which has
audio files in a certain folder, turn the dial to display the
folder name. When a folder is selected, the indication
“Folder” is shown in the right side of the display.
ImprtSrc
ImprtSrc
END
END
0 0
0
2
2
10
10
002
002
2
2
24
24
00
00
IMPORT
IMPORT
CD-ROM
CD-ROM
IMPORT
IMPORT
LOOP.WAV
LOOP.WAV
File name
Folder name
IMPORT
IMPORT
WAVFILES
WAVFILES
Folder
Folder
1608E.book 124 ページ 2004年4月19日 月曜日 午前10時44分
Page view 123
1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 223 224

Comments to this Manuals

No comments