Reference [Other Functions]
ZOOM MRS-1608
182
When mixing down to a DAT recorder, MD recorder or
similar via the DIGITAL OUTPUT jacks, you can
prevent digital copies (third-generation copies) from
being made from your completed master disc or tape onto
another digital recorder. The procedure is as follows.
1.
From the main screen, press the [UTILITY/
TRACK EDIT] key in the display section.
The indication “UTILITY TR EDIT” appears on the
display.
2.
Use the cursor left/right keys to bring up
the indication “UTILITY SYSTEM” on the
display, and press the [ENTER] key.
The display indication changes as follows.
3.
Use the cursor left/right keys to bring up
the indication “UTILITY D PRTCT” on the
display, and press the [ENTER] key.
The current setting for digital copying will be displayed.
The settings have the following meaning.
●
OFF (default setting)
Digital copying from your master tape to another digital
recorder is permitted.
●
ON
SCMS (Serial Copy Management System) data will be
added to the digital signal that is output from the
[DIGITAL OUTPUT] jack. It will not be possible to
make digital copies (third-generation copies) from a
master tape or master disc that contains this data.
4.
Turn the dial to select the “ON” setting.
5.
To return to the main screen, press the
[EXIT] key several times.
The level meter below the display can indicate the level
of the signal after passing through the level controls/
faders (post-fader) or the signal before passing through
the level controls/faders (pre-fader). You can change the
setting as follows.
HINT
When sending the signal of a given track/input to the
STEREO SUB-OUT jack, the signal before the fader is sent.
By switching the level meter to the pre-fader setting, you can
monitor the signal level sent to the STEREO SUB-OUT jack.
1.
From the main screen, press the [UTILITY/
TRACK EDIT] key in the display section.
The indication “UTILITY TR EDIT” appears on the
display.
2.
Use the cursor left/right keys to bring up
the indication “UTILITY SYSTEM” on the
display, and press the [ENTER] key.
The display indication changes as follows.
Preventing digital copying of
a master disc or master tape
SYSTEM
FOOT SW
D PRTCT
OFF
Switching the level meter
display type
MRS-1608
[OUTPUT]
(DIGITAL) jack
[OUTPUT]
(DIGITAL) jack
MD/DAT recorder
MD/DAT recorder
(D PRTCT=ON)
MRS-1608
(D PRTCT=OFF)
Mixdown
MD/DAT recorder
MD/DAT recorder
Mixdown
Digital copying
is not possible
Digital copying
is possible
1608E.book 182 ページ 2004年4月19日 月曜日 午前10時44分
Comments to this Manuals