Zoom MRS-4 Specifications download pdf (Page 115)

Reference [Rhythm]

ZOOM MRS-1608

115

Use the cursor left/right keys to select an

item to set. The following items are

available.

• Instrument sound

Lets you select a single drum/percussion sound from the

currently selected drum sound set to assign to a pad. For

a list of numbers and corresponding sound names, refer

to the appendix at the end of this manual.

• PITCH

Adjusts the pitch of the drum/percussion sound for the

pad. The setting range is -7.9 – 0 (reference pitch) – 7.9,

in steps of 0.1 (1/10 of a semitone).

• LEVEL

Adjusts the output level for the pad. The setting range is

0 – 15.

HINT

When you press the [DRUM MIXER] key at the drum kit

selection screen, you can use faders 1 – 8 and 9/10 – 15/16

to set the LEVEL parameter (

→

p. 117).

•PAN (Panning)

Adjusts the left/right stereo position (panning) for the

pad. The setting range is L63 (far left) – 0 (center) – R63

(far right).

HINT

The panning value set here is valid regardless of the track

parameter pan setting. When you set the track parameter

pan to left/right, the left/right volume balance changes while

the positioning of each pad is retained.

• GROUP (Pad group)

Selects the type of sound produced when pads are hit in

succession (PL/MN) and the group to which the pad

belongs (0 – 7). The setting range is PL0 – PL7 and MN0

– MN7. When PL is selected, hitting same pad in

succession will produce overlapping sound, i.e. the

previous sound continues while the next one starts. When

MN is selected, the previous sound stops when the next

one starts.

The numbers 0 – 7 specify the group to which the pad

belongs (0 = no group, 1 – 7: respective group). Pads in

the same group cannot produce sound at the same time.

For example, if you assign an open hi-hat sound and

closed hi-hat sound to two pads in the same group, the

open hi-hat sound will cease when you play the closed hi-

hat sound, resulting in realistic action.

• REV SEND (Reverb send)

Sets the reverb send level for each pad. The setting range

is 0 – 127. This setting is independent from the reverb

send level setting made as part of the track parameters.

• NAME (Drum kit name)

Lets you change the name of the drum kit

(

→

p. 116)

Press the pad for which you want to make

a setting.

The setting for the pad appears on the display. For

example, if PAN is selected as parameter and you press

pad 3, the display indication changes as follows.

Turn the dial to select a setting value.

Repeat steps 5 – 7 as necessary to edit

other pads.

When the setting is complete, press the

[EXIT] key.

The unit returns to the drum kit selection screen. The

created drum kit is saved as part of the project.

HINT

You can also copy all the settings for a pad to another pad.

To do this, press the [INSERT/COPY] key while a parameter

for the copy source pad is displayed. Then select the pad

bank and pad to which you want to copy the settings, and

press the [ENTER] key.

GROUP=PL GROUP=MN

PAD:1-3

PAN

L16

1608E.book 115 ページ２００４年４月１９日　月曜日　午前１０時４４分

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 223 224

Zoom MRS-4 Specifications Page 115

Comments to this Manuals

Zoom MRS-4 Specifications Page 115

Comments to this Manuals

Related products and manuals for Recording Equipment Zoom MRS-4