Zoom MRS-4 Specifications download pdf (Page 144)

Reference [Effects]

ZOOM MRS-1608

144

NOTE

• The indications shown in the table on the previous page are

for the condition where the effect module is on. When the

effect module is off, the indication “-OFF-” is shown on the

second line.

• The 8x COMP EQ algorithm does not include a ZNR module.

To change the effect type of the currently

selected effect module, turn the dial.

For effect modules which comprise multiple effect types, the

name of the currently selected effect type is shown on the

second line of the display. When you turn the dial in this

condition, the effect type changes.

HINT

If the contents of a patch have been changed, the “EDIT”

indicator in the upper part of the display will change to

“EDITED”. When the setting is returned to the original condition,

the indicator reverts to “EDIT”.

Use the cursor up/down keys to select the

effect parameter that you want to edit.

The following diagram shows an example of what appears

on the display when you have selected the DEPTH

parameter of the “FLANGER” effect.

HINT

To reselect the effect type, repeatedly press the cursor up key to

bring up the effect type name, and then turn the dial.

Turn the dial to change the setting value.

For details on the effect types that can be selected for each

effect module and on the effect parameters of each type,

refer to the information in the appendix of this manual.

To toggle the effect module on or off, bring up

the indication for the module on the display,

and then press the [ENTER] key.

When the effect module is turned off, the indication “-OFF-”

is shown on the second line of the display. Pressing the same

key once more returns the module to the active condition.

HINT

In the 8xCOMP EQ algorithm, the effects in the respective

channels cannot be switched on or off together in a single step.

However, when the setting for the respective effect is shown,

simply pressing the [ENTER] key will toggle the effect between

on and off.

NOTE

The modules included in TOTAL cannot be turned off.

Repeat steps 3 – 7 as necessary to edit other

modules.

To adjust the patch level (the ﬁnal volume of

the patch), press the [TOTAL] key, use the

cursor left/right keys to bring up the

indication “TOTAL PAT LVL”, and turn the dial.

The patch level can be adjusted in the range from 1 to 30.

10.

When you have ﬁnished editing, press the

[EXIT] key.

The insert effect patch select screen appears again.

NOTE

Keep in mind that if you select another patch without ﬁrst storing

the edited patch, the changes will be lost. To keep the results of

your editing session, refer to the following section.

Effect type name

MOD/DLY

FLANGER

DEPTH

Setting value

FLANGER

-OFF-

TOTAL

PAT LVL

1608E.book 144 ページ２００４年４月１９日　月曜日　午前１０時４４分

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 223 224

Comments to this Manuals

No comments

Zoom MRS-4 Specifications Page 144

Comments to this Manuals

Related products and manuals for Recording Equipment Zoom MRS-4