Zoom MRS-4 Specifications download pdf (Page 43)

Reference [Recorder]

ZOOM MRS-1608

◆

Selecting the recording destination V-

take

By default, the result of the bounce operation will be

recorded on the V-take that is currently selected for the

recording track(s). To play back a track while bouncing onto

another V-take of that track, you can use the following

procedure to change the recording destination V-take.

From the main screen, press the [UTILITY/

TRACK EDIT] key.

The indication “UTILITY TR EDIT” appears on the display.

Use the cursor left/right keys to bring up

the indication “UTILITY BOUNCE” on the

display, and press the [ENTER] key.

Use the cursor left/right keys to bring up

the indication “BOUNCE REC TAKE” on the

display, and press the [ENTER] key.

The current setting is shown.

The indications have the following meaning.

• CURRENT:

The bounce result will be recorded on the V-take currently

selected for the recording track (default setting).

•1 – 10:

The bounce result will be recorded on the V-take of the

recording track with the speciﬁed number.

Turn the dial to specify the recording

destination V-take.

To return to the main screen, press the

[EXIT] key several times.

Executing bounce recording

This example explains how to bounce the contents of

tracks 1 – 16 and the drum/bass tracks onto V-take 10 of

tracks 15/16.

Refer to “Making bounce settings” and set

the bounce target track to “PLAY”.

Refer to “Making bounce settings” and

select V-take 10 for the bounce target

track.

From the main screen, press the status

keys of tracks 15/16 repeatedly, so that the

keys are lit in red.

Tracks 15/16 are now ready for recording.

Press the [BOUNCE] key in the control

section.

The key lights up and the bounce function for the target

tracks is turned on. Other tracks and effects function

normally.

Set the recorder to playback and adjust the

mixing balance of the various tracks.

The individual track level settings as well as the insert

effect and send/return effect settings all have an inﬂuence

on the mixed signal that is sent to the bounce target

tracks.

Adjust levels while watching the L/R level meter, and

make sure that no signal clipping occurs.

Move the recorder to the beginning and

start recording.

Recording on tracks 15/16 starts.

When recording is complete, press the

STOP [P

] key.

HINT

•To check the result of the bounce operation, select the V-

take for the bounce target tracks and mute the other

tracks. Note that the track parameters will continue to be

valid. To monitor the unprocessed sound, return the track

volume and EQ settings for the bounce target tracks to the

default condition. When bouncing in stereo to two mono

tracks, set the Pan parameter for the odd-numbered track

to L 100 and for the even-numbered track to R 100.

• If only the signal from the drum track or bass track is

recorded, refer to ”Selecting drum/bass track as recording

REC TAKE

CURRENT

1608E.book 43 ページ２００４年４月１９日　月曜日　午前１０時４４分

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 223 224

Zoom MRS-4 Specifications Page 43

Comments to this Manuals

Zoom MRS-4 Specifications Page 43

Comments to this Manuals

Related products and manuals for Recording Equipment Zoom MRS-4