Zoom Pro 4040 Specifications download pdf (Page 9)

• Select the bank with the BANK pedals.

A bank is a group of four patches. There are ten banks each

(numbered 0 through 9) for the USER group and the

PRESET group. The BANK ▲ pedal selects the next higher

bank, and the BANK ▼ pedal the next lower bank. (The

bank number display flashes.)

Merely pressing one of the BANK pedals does not

yet change the patch. To activate the patch and

change the sound, press one of the pedal switches 1 -

4, as described below.

• Select the patch by pressing one of the pedal switches

1 – 4.

The LED of that pedal lights up, showing that the patch has

been selected. (The BANK number is now constantly lit.)

Now would be a good time to try out some of the various

patches offered by the 4040 while playing your instrument.

Useful functions in the Play mode

Some other useful functions available in Play mode are

described below.

■ Adjusting the patch level

The final output level of the patch — called the patch level

— is also stored as a parameter along with the other

parameters of the patch. In the Play mode, the patch level

can be adjusted.

• Press the VALUE + / - keys in the Play mode.

When one of the VALUE + / - keys is pressed, the current

patch level setting is shown on the display as a numeric

value (0 – 50). Pressing VALUE + increases the value and

pressing VALUE - decreases it. To change values

continuously, hold down the key. To change values more

rapidly, press the other key as well.

The patch level setting change made in this way is

only temporary. If you select a different patch

without storing the new level setting first, the setting

will be lost. (For details on how to store settings,

please refer to page 12.)

In the Play mode, the patch level can be adjusted

also for patches from the PRESET group, but the

new level setting cannot be stored. When wishing to

store the level, select a patch from the USER group.

■ Bypassing the effects

You can temporarily turn off all effects in a patch. This is

useful for example to check the sonic character of a patch.

The bypass mode is also used for the chromatic tuning

function.

• In the Play mode, press the pedal switch 1 - 4 whose

LED is lit (i.e. the pedal switch that was used to choose

the current patch).

All effects in the patch are now bypassed and the original

instrument sound is heard. In the bypass condition, the LED

of the selected patch flashes and the tuner LED lights up.

• Press the pedal switch once more to turn the patch on

again. Normal Play mode can also be restored by

selecting a different patch.

■ Tuning a guitar

The 4040 incorporates an automatic guitar tuning function.

When the 4040 is set to the bypass mode, the tuning

function is automatically enabled.

• In the Play mode, press the pedal switch 1 – 4 whose

LED is lit. This activates the bypass mode and the

tuner LED lights up.

NOTE

GROUP=PRESET GROUP=USER GROUP=BOTH

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 28 29

Comments to this Manuals

No comments

Zoom Pro 4040 Specifications Page 9

Comments to this Manuals

Related products and manuals for Music Pedal Zoom Pro 4040