Zoom Pro 4040 Specifications download pdf (Page 24)

Tapping input of delay time

The delay time of the delay module can be set by tapping

the BANK ▲ pedal in the desired interval. By mastering this

technique, you can easily adjust the delay time to match the

tempo of a song.

• In Play mode, select the patch you want to edit (from

either the USER or the PRESET group). Press the

EDIT/CANCEL key to activate the Edit mode.

• Tap the BANK ▲ pedal at least twice, in the desired

tempo.

The 4040 detects the interval between taps of the pedal

switch and sets the delay time accordingly.

• Press the EDIT/CANCEL key once more to return to

the Play mode.

The tapping input method can be used only for the

delay time of the DELAY module, and only when

the DELAY module is on. The maximum delay time

is 1000 ms. If the tapping interval is between 1000

and 2000 ms, the delay time will be set to one half

the interval time. If the tapping interval is more

than 2000 ms, the delay time is not set.

External effecter loop

An external effect device connected to the EXTERNAL

SEND/RETURN connector is inserted in series between the

compression and distortion sections in the PRE module. The

on/off setting of the send/return loop can be stored as part of

a patch. This lets you for example connect a compact

effecter for distortion etc. and control it as part of the 4040.

• In Play mode, press the EDIT/CANCEL key to

activate the Edit mode.

• Use the PARAMETER SELECT key to select the

TOTAL parameter EXTERNAL LOOP.

• Use the VALUE +/- keys to set the parameter value to 1

(on).

The signal is now routed through the external loop and

can be altered by any device connected in the loop.

• If you wish to use this setting also in future, store the

patch.

Since the on/off condition of the external loop will

be controlled by the 4040, you should leave the

connected effect switched on. The signal level

returned to the 4040 can be adjusted at the

connected effect.

External control

Some guitar amplifiers or preamplifiers with several

channels allow the user to switch channels with a foot

switch. Some amplifiers also allow internal effect on/off

control by foot switch. The EXTERNAL CONTROL OUT

connector of the 4040 can be used to duplicate the action of

a foot switch for amplifier channel control or internal effect

on/off control in conjunction with a patch of the 4040.

EXT CNTL OUT

4040

FOOT SW IN

Guitar amplifier

Stereo cable or mono cable

HINT

SENDRETURN

4040

COMPACT

EFFECTOR

OUT

NOTE

Edit Mode Application Examples

This section gives pointers on how to use some advanced features of the Edit mode and the TOTAL parameters.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29

Comments to this Manuals

No comments

Zoom Pro 4040 Specifications Page 24

Comments to this Manuals

Related products and manuals for Music Pedal Zoom Pro 4040