Zoom Pro 4040 Specifications download pdf (Page 25)

As shown in the diagram, this output is designed for a stereo

connection, allowing on/off control of two channels.

Use a stereo cable or mono cable to connect the 4040 to the

channel switching connector on the amplifier. The amplifier

function is controlled according to whether the tip and ring

of the plug are shorted to ground or not.

• In Play mode, press the EDIT/CANCEL key to

activate the Edit mode.

• Use the PARAMETER SELECT key to select the

TOTAL parameter EXTERNAL CONTROL OUT.

• Use the VALUE +/- keys to set the value.

Applicable values are shown in the table below.

• If you wish to use these settings, they must be stored in

the patch.

Since the specifications for control connectors vary

for different amplifiers, you may have to try out a

variety of settings and cable connections. Normally,

using a cable of the same type as the cable for the

foot switch that came with the amplifier is

recommended. For details, please refer to the

manual of the amplifier.

Even if equipped with a foot switch connector, some

amplifiers may not be suitable for control by the

4040.

Expression pedal control

The EXP pedal of the 4040 can be used to adjust an effect

parameter in real time. For example, you might change the

distortion depth during a performance, or increase the

amount of reverberation. The parameters available for

control by the EXP pedal depend on the module and the

effects used in the selected patch.

• In Play mode, press the EDIT/CANCEL key to

activate the Edit mode.

• Use the PARAMETER SELECT key to select the

parameter EXP. SELECT.

• Use the VALUE +/- keys to set the value.

• If you wish to use these settings, they must be stored in

the patch.

For parameters marked with an * in the table, the

range is always MIN <–> MAX, regardless of the

setting.

NOTE

EXP. SELECT

MODULE

Parameters Available for

0 OFF

1 PRE

OD I, OD II,

DIST I, DIST II,

LEAD, METAL

… GAIN*

2EQ

AUTO WAH

PDL WAH

…

SENSE*

FREQ*

3 MODULATION

PDL PIT

PIT

FLG

PHA

TRM

STEP

SLOW

CHO

…

PIT

BAL

PEAK

RATE

PEAK

RATE

BAL

4 DELAY

MONO

PING PONG

…

MIX*

5 REVERB

HALL

ROOM

DELAY

…

MIX*

VALUES

Pedal Control

NOTE

HINT

EXTERNAL

CONTROL

Status of the Connectors

RING TIP

1 Shorted Shorted

2 Open Open

3 Open Shorted

4 Shorted Open

VALUES

TIPGROUND

RING

Stereo plug

1 2 ... 20 21 22 23 24 25 26 27 28 29

Comments to this Manuals

No comments

Zoom Pro 4040 Specifications Page 25

Comments to this Manuals

Related products and manuals for Music Pedal Zoom Pro 4040