Zoom Pro 4040 Specifications download pdf (Page 26)

Restoring individual factory preset

patches (patch recall)

The 4040 contains a ROM (read-only memory) in which all

factory preset patch data are permanently stored. Even if

patches have been edited and stored in the USER group, the

original factory preset patches can be individually recalled at

any time.

• Turn off the 4040 (with the amplifier volume set to

minimum), and turn the unit back on while keeping

the EDIT/CANCEL key depressed.

The indication “FC” flashes on the display. This shows

that the unit is ready for recalling individual patches from

the internal ROM.

• Press the STORE key.

You now can select the group, bank number and patch

number you want to restore.

The indication of “FC” and “U0” (group and bank

numbers) alternately appears on the display.

• Use the GROUP key, BANK ▼/▲pedals, and pedal

switches 1 – 4 to select the desired patch.

At this time, the sound of the patch can be monitored.

• Press the STORE key once more.

The selected patch is now restored to the same setting as

when the unit was shipped.

• Turn off the 4040, and then turn it on again for normal

use.

The 4040 will be in regular Play mode.

When the factory setting of a patch is recalled, any

setting previously stored in that patch will be lost.

By using the GROUP key before pressing the

STORE key a second time, you can compare the

sound of the user-stored patch and the recalled

factory-preset patch before overwriting the patch

contents.

Restoring all factory preset patches

(initialize)

This special function returns all patches in the USER group

to the factory preset condition. Use this function with care,

because all patches you have stored will be lost.

• Turn off the 4040 (with the amplifier volume set to

minimum), and turn the unit back on while keeping

the STORE key depressed.

The indication “AL” flashes on the display. This shows

that the unit is ready for recalling all patches from the

internal ROM.

• When wishing to initialize all patches

Press the STORE key once more. This restores all patches

to their factory preset condition. The 4040 then switches

to the Play mode.

• When wishing to cancel the function

Press the EDIT/CANCEL key. The 4040 switches to the

Play mode without changing the patch settings.

Volume pedal control

The VOL pedal of the 4040 can be used to adjust the volume

level between the EQ module and the MODULATION

module. This lets you adjust the volume without changing

the delay or reverb settings. The minimum volume level that

is used when the VOL pedal is fully raised can be set and

stored as part of a patch.

• In Play mode, press the EDIT/CANCEL key to

activate the Edit mode.

• Use the PARAMETER SELECT key to select the

TOTAL parameter MINIMUM VOLUME.

• Use the VALUE +/- keys to set the value.

When you want to retain the setting, store any

patch. This will also store the MINIMUM

VOLUME setting. If you turn off the 4040 without

storing a patch, the setting will revert to the default

value.

NOTE

Other Functions

This section describes use of the special mode and the MIDI function of the 4040.

1 2 ... 21 22 23 24 25 26 27 28 29

Comments to this Manuals

No comments

Zoom Pro 4040 Specifications Page 26

Comments to this Manuals

Related products and manuals for Music Pedal Zoom Pro 4040