Zoom MRS-8 User Manual Page 78

  • Download
  • Add to my manuals
  • Print
  • Page
    / 148
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 77
Reference [Rhythm]
ZOOM MRS-8
78
In this condition, you can input rhythm pattern
information for the current point.
5.
Turn the dial to select the rhythm pattern to
insert.
6.
Use the cursor up/down keys to specify the
number of measures to insert.
If you specify more measures than the original length of
the rhythm pattern, the rhythm pattern will be repeated. If
you specify fewer measures, the song will switch to the
next rhythm pattern before the current pattern has
finished playing.
7.
To finalize the setting, press the [ENTER]
key.
The rhythm pattern information will be input at the
current location, and the display reverts to the original
screen. The “EOS” indication is moved back by the
number of measures that were inserted.
By pressing the PLAY [
R
] key while this display is
shown, you can repeatedly play the rhythm pattern
entered at the current point.
8.
Repeatedly press the cursor right key to
move to the measure number for which
“EOS” is shown on the second line of the
display.
During rhythm song step input, you can use the cursor
left/right keys to move the input position in measure
units. When you reach the end of the song, the indication
“EOS” is shown on the second line of the display.
HINT
The REW [T
] and FF [Y
] keys in the transport section can be
used to move the current position in beat units.
When “EV
” is shown on the display, turning the dial moves
the current position in sixteenth note units. By bringing up the
“EV
” indication to move to a point within a measure and
then using the cursor up/down keys to display event
information, you can enter event information in sixteenth note
units (
p. 83).
9.
Repeat steps 4 – 8 to enter all required
pattern information.
10.
When all required pattern information has
been entered, press the STOP [
P
] key.
The REC [
O
] key goes out and the rhythm song selection
screen appears again. If you press the PLAY [
R
] key, the
created rhythm song will be played.
To edit the entered rhythm pattern information, proceed
as follows.
Selecting a different rhythm pattern
Use the cursor left/right keys to move to the point where
the respective rhythm pattern information is input, and
then turn the dial to select the new rhythm pattern.
By turning the dial at a point where no rhythm pattern
information is input (“
PTN” is shown), you can add
new rhythm pattern information for this point.
The newly selected rhythm pattern information will
always be valid until the point where the next rhythm
pattern information is input.
Deleting entered rhythm pattern information
Use the cursor left/right keys to move to the position of
the rhythm pattern information to delete, and press the
[FUNCTION] key twice. (The indication “EV ERASE
SURE?” appears.) Then press the [ENTER] key. When
rhythm pattern information was deleted, the previous
pattern will remain valid until the point where the next
rhythm pattern information is input.
PTN 002
PTN 002
08Beat03
08Beat03
1- 1- 0
PATTERN 002 End of Song
Current position
Rhythm
song
(measure number)
321
PTN
PTN
EOS
EOS
å
3- 1- 0
End of Song
PATTERN 002
Current position
Rhythm
song
(Measure number)
3
21
PATTERN A PATTERN B PATTERN C
PATTERN A PATTERN C
Delete
MRS-8(E).book 78 ページ 2004年7月30日 金曜日 午後5時24分
Page view 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 147 148

Comments to this Manuals

No comments