Zoom MRS-8 User Manual Page 54

  • Download
  • Add to my manuals
  • Print
  • Page
    / 148
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 53
Reference [Track Editing]
ZOOM MRS-8
54
2.
Use the cursor left/right keys to bring up
the indication “SYSTEM CAP/SWAP” on the
display, and press the [ENTER] key.
The display changes as follows.
3.
Use the status keys or the dial to select a
track for capture.
The status key for the currently selected track is lit in
orange. It is also possible to select the master track. In this
case, the indication shows “MASTER” and the
[MASTER] status key is lit.
HINT
•Tracks for which stereo link is active, stereo tracks, and the
master track can only be captured in stereo.
•A track for which an unrecorded V-take is selected cannot be
captured.
4.
Press the [ENTER] key.
The indication “CAPTURE SURE?” appears on the
display.
5.
To carry out the capture operation, press
the [ENTER] key once more.
When capture is completed, the indication “SWAP TR x”
(where x is the track number) appears on the display. This
indicates that the track has been captured and can be
swapped if necessary.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
6.
To return to the main screen, press the
[EXIT] key repeatedly.
You can swap the current data of a track with the captured
data.
1.
From the main screen, press the [SYSTEM/
UTILITY] key in the display section.
The indication “SYSTEM PROJECT” appears on the
display.
2.
Use the cursor left/right keys to bring up
the indication “SYSTEM CAP/SWAP” on the
display, and press the [ENTER] key.
3.
Use the status keys or the dial to select a
track that was previously captured.
When you select a captured track, the indication “SWAP”
appears on the display.
HINT
If you select a track that was not captured, the indication
“CAPTURE” appears.
NOTE
Captured audio data can only be swapped with the original
track.
4.
Press the [ENTER] key.
The indication “SWAP SURE?” appears on the display.
5.
To carry out the swap operation, press the
[ENTER] key once more.
When the operation is completed, the audio data of the
selected track will have been replaced by the previously
captured audio data.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
HINT
By performing the swap operation once more, you can return
the track contents to the previous condition.
6.
To return to the main screen, press the
[EXIT] key repeatedly.
SYSTEM
SYSTEM
PROJECT
PROJECT
CAPTURE
CAPTURE
TR1
TR1
Swapping track data
SWAP
SWAP
TR1
TR1
MRS-8(E).book 54 ページ 2004年7月30日 金曜日 午後5時24分
Page view 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 147 148

Comments to this Manuals

No comments