Zoom MRS-8 User Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 148
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
Quick Tour
ZOOM MRS-8
23
When the insert effect is bypassed for recording, setting the
REC LVL parameter to 100 (default) results in unity gain (the
recording level same as the input level).
Now we will select a track and record the input sound
(with the insert effect applied) on that track.
1.
From the main screen, repeatedly press the
status key of the recording track until the
key is lit in red.
The audio track status keys are used to select the
recording track and to switch muting for each track on
and off. Each time you press a status key, the key will
cycle through the following states.
When all status keys are green, the input signal will not
be sent to the tracks and will go directly to the
[MASTER] fader. (Panning and send/return effect depth
can be adjusted in this case.)
When a status key is red, the track is in the recording
standby condition and the input signal is assigned to that
track.
If a mono track (1 – 4) has been selected as recording
track, the signal routing will be as follows.
If a stereo track has been selected as recording track, the
signal routing will change as shown below. Except for the
V-take selection, the parameters for left/right stereo
tracks are set to the same values. This is useful for
recording from a stereo source such as a synthesizer or
CD player.
HINT
•You can select up to two tracks for recording, either one
stereo track or two mono tracks. To select two mono tracks,
press the first status key of an odd/even-numbered pair so
that it is lit in red, and then hold down that key and press the
other key so that it also is lit in red.
If the input signal is mono, selecting a pair of stereo tracks as
target will ensure that the left/right spread added by certain
insert effect settings is preserved in recording.
2.
Set the fader for the recording track and the
[MASTER] fader to 0 (dB). Then adjust the
volume of the monitor system while playing
your instrument.
3.
To begin recording, press the ZERO [
U
]
key to return to the beginning of the song.
Then hold down the REC [
O
] key and press
the PLAY [
R
] key.
2.3 Selecting a track and
recording
Lit in red
Mute off Mute on Selected as
recording track
Lit in green Out Lit in red
Status key
Recording track not selected
One Input source
Two Input sources
MASTER
MASTER
Track 1
Track 2
Track 1
Track 2
MASTER
1
MASTER
1
Track 1
Track 2
Track 1
Track 2
Mono track selected
One Input source
Two Input sources
Stereo track selected
Two Input sources
MASTER
7/8
Track 7/8
MRS-8(E).book 23 ページ 2004年7月30日 金曜日 午後5時24分
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 147 148

Comments to this Manuals

No comments