Zoom MRS-8 User Manual Page 45

  • Download
  • Add to my manuals
  • Print
  • Page
    / 148
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 44
Reference [Track Editing]
ZOOM MRS-8
45
7.
Press the [ENTER] key.
The subsequent steps will differ, depending on which
command was selected in step 4. See the sections for the
respective commands.
8.
When the editing command has been
carried out, press the [EXIT] key repeatedly
to return to the main screen.
NOTE
After executing an edit command for rewriting audio data,
the original data cannot be restored. To retain the condition
before editing, use the capture and swap function (
p. 53).
You can copy the audio data of a specified range to a
specified position on a specified track/V-take. This action
will overwrite the existing data at the destination
location. The copy source data will be unchanged.
1.
Refer to steps 1 – 6 of “Basic steps for
range editing” to select the copy source
track/V-take, and press the [ENTER] key.
The display changes as follows. In this condition, you can
specify the copy start point.
The copy range start point is shown on the counter in
minutes, seconds, milliseconds, and in measures, beats,
and ticks.
2.
Use the cursor left/right keys to move the
flashing section of the counter, and turn the
dial to specify the copy start point.
The point can be specified in minutes/seconds/
milliseconds, or in measures/beats/ticks. You can also use
the MARKER [
U
] / [
I
] keys to jump to a mark (
p.
36) and use this as starting point.
HINT
If you specify a point where no audio data exist, the second
line of the display shows *.
3.
Press the [ENTER] key.
The display changes to “Copy Src END”. This screen lets
you specify the copy range end point.
HINT
The specified range is memorized until another entry is
made. This lets you keep using the setting for editing the
same range on a number of tracks.
4.
Specify the copy end point in the same way
as described in step 2.
If you press the PLAY [
R
] key at this point, the specified
range will be played.
5.
Press the [ENTER] key.
The display now shows “Copy Dst TR x-yy” (where x is
the track number and yy the V-take number). From this
screen, you can specify the copy destination track/V-take.
HINT
You can select the same track as copy source and copy
destination, and the copy destination range may overlap the
copy source range.
6.
Select the copy destination track/V-take in
the same way as for the copy source, and
press the [ENTER] key.
Copying a specified range of
data
Copy source track
Copy destination track
Copy
Copy Src
Copy Src
START
START
1- 0 0 0 1- 0
00
Copy Src
Copy Src
END
END
75- 3 15 0 4- 0
00
Copy Dst
Copy Dst
TR 1- 1
TR 1- 1
MRS-8(E).book 45 ページ 2004年7月30日 金曜日 午後5時24分
Page view 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 147 148

Comments to this Manuals

No comments