Zoom B9.1ut Specifications download pdf (Page 5)

ZOOM G7.1ut

AC adapter

Expression pedal

Guitar

-10 dBm/+4 dBm switch

Guitar amplifiers

Headphones

Rhythm machine

MIDI

interface

Computer

MTR

When connecting to the power amplifier input on the

rear panel of a guitar amplifier, set the switch to "+4

dBm". The G7.1ut incorporates a feature for matching

its characteristics to the amplifier (amp select function).

For details, see page 52.

Use a monaural

shielded cable to

connect the guitar.

Use mono cables for connection to guitar amplifiers. When using

only one guitar amplifier, use the OUTPUT L/MONO jack.

Connect optional expression

pedal (FP01/FP02)

Use a stereo Y adapter cable to connect a rhythm

machine (ZOOM RT-223 or similar) or a

CD/MD player or similar. The signal supplied to

the AUX IN jack is not processed by the internal

effects, it is supplied to the OUTPUT L/MONO

and OUTPUT R jacks as is. The signal is also

sent to the USB port.

Patch switching and

pedal operation

information can be sent

and received as MIDI

messages.

By connecting the USB port to

a computer, the G7.1ut can be

used as an audio interface.

Connection example (1)

Connection example (2)

When connecting to the guitar input on the front panel

of a guitar amplifier, set the switch to "-10 dBm".

Guitar amplifier (rear panel)

Getting Connected

Refer to the examples shown below when making connections.

ZOOM G7.1ut

Power-On

The steps for turning on the G7.1ut are described below.

Make sure that any connected guitar

amplifier is turned off.

In addition, fully turn down the volume control at

the guitar amplifier.

Plug the AC adapter into an AC outlet

and plug the cable from the adapter

into the AC IN connector of the

G7.1ut.

Use a monaural cable to connect the

guitar to the INPUT jack of the G7.1ut.

Use a monaural cable to connect the

OUTPUT L/MONO jack to the guitar

amplifier (when using one amplifier)

and the OUTPUT R jack to the second

guitar amplifier (when using two

amplifiers).

HINT

To monitor with headphones, plug the headphone

cable into the PHONES jack of the G7.1ut.

Turn power on in the following order:

G7.1ut

→→

guitar amplifier(s)

NOTE

Proceed with care when powering up the system.

If you turn on power to the G7.1ut while the guitar

amplifier is already on, there is a risk of hearing

damage and damage to the speakers.

Play your guitar and adjust the

volume control on the guitar amplifier,

on the guitar, and the LEVEL knob on

the rear panel of the G7.1ut to obtain

optimum listening volume.

HINT

The G7.1ut has a so-called "Amp Select" feature

that lets you match the unit to various kinds of

amplifiers. If necessary, select the appropriate

setting for your amplifier the first time you use the

G7.1ut (

→

p. 52).

To shut down the system, turn power

to the respective components off in

the reverse order than during power-

up.

HINT

When the -10 dBm/+4 dBm switch on the rear

panel is set to "-10 dBm" and the LEVEL knob is

turned fully up, the G7.1ut has unity gain (output

level is the same as input level).

LEVEL knob

Rear panel

1 2 3 4 5 6 7 8 9 10 ... 40 41

Comments to this Manuals

No comments

Zoom B9.1ut Specifications Page 5

Comments to this Manuals

Related products and manuals for Musical Equipment Zoom B9.1ut