Zoom B9.1ut Specifications download pdf (Page 15)

Storing Patches and Banks (Store Mode)

ZOOM G7.1ut

5. Use parameter knob 1 or the foot

switches 1 – 4 to select the store/

swap target patch number.

6. Press the [STORE/SWAP] key once

more.

The store/swap process is carried out, and the

G7.1ut then returns to the play mode or manual

mode with the store/swap target patch being

selected.

By pressing the [EXIT] key instead of the

[STORE/SWAP] key, you can cancel the process

and return to the previous mode.

NOTE

The Energizer settings are not stored as part of the

patch.

Storing/swapping banks

This section explains how to store and swap entire

banks.

1. In play mode, manual mode, or edit

mode, press the [STORE/SWAP] key.

The G7.1ut switches to the store standby

condition, and the currently selected bank

becomes the store/swap source.

2. To store/swap entire banks, turn

parameter knob 3 to bring up the

indication "BANK" in the top right of

the display.

3. Turn parameter knob 2 to bring up the

indication "STORE?" or "SWAP?" on

the display.

When "STORE?" is selected, the current bank can

be stored as any user bank.

When "SWAP?" is selected, the current user bank

can be swapped with any other user bank.

NOTE

If the source bank is from a preset group, the

indication "SWAP?" does not appear.

4. Use the [TYPE] knob or BANK [W]/

[Q] foot switches to select the store/

swap target bank.

5. Press the [STORE/SWAP] key once

more.

The store/swap process is carried out, and the

G7.1ut then returns to play mode or manual mode

with the store/swap target bank being selected.

By pressing the [EXIT] key instead of the

[STORE/SWAP] key, you can cancel the process

and return to the previous mode.

Foot switches 1 - 4

™STORE?

STORE?

åU1

BANK U0

£:BANK

:BANK

Store/swap source group name/bank number

Store/swap

target group

name/bank number

Store/swap

target group

name/bank number

Storing Patches and Banks (Store Mode)

ZOOM G7.1ut

Returning patches to

factory default condition

Even if you have made changes to the user group

patches, you can return all patches to the factory

default condition at any time. To do this, proceed

as follows.

1. Turn power to the G7.1ut on while

holding down the [STORE/SWAP] key.

The indication "All Initialize?" appears on the

display.

2. Press the [STORE/SWAP] key once

more.

All patches are returned to the factory default

condition, and the G7.1ut switches to play mode.

By pressing the [EXIT] key before performing

step 2, you can cancel the process.

All Initialize?

Y:STORE N:EXIT

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 40 41

Comments to this Manuals

No comments

Zoom B9.1ut Specifications Page 15

Comments to this Manuals

Related products and manuals for Musical Equipment Zoom B9.1ut