Zoom B9.1ut Specifications download pdf (Page 23)

MIDI Usage Examples

ZOOM G7.1ut

● When module on/off switching is

performed

When the module is set to on, the value 127 of

the control change number is sent. When the

module is set to off, the value 0 of the control

change number is sent.

● When bypass/mute on/off switching is

performed

When bypass/mute is set to on, the value 127 of

the control change number is sent. When

bypass/mute is set to off, the value 0 of the

control change number is sent.

● When pre-amp section channel A/B

switching is performed

When switching to channel A, the value 0 of

the control change number is sent. When

switching to channel B, the value 127 of the

control change number is sent.

■ Example for receiving control

change messages

According to the control change value received,

the G7.1ut status and parameter values change as

follows.

● When control change for built-in/

external expression pedal is received

The value of the parameter assigned to the

pedal changes according to the control change

value (0 – 127).

● When control change for module on/off

is received

If control change value is between 0 and 63, the

module is switched off. If control change value

is between 64 and 127, the module is switched

on.

● When control change for bypass/mute

on/off is received

If control change value is between 0 and 63,

bypass/mute is switched off. If control change

value is between 64 and 127, bypass/mute is

switched on.

● When control change for pre-amp

section channel A/B switching is

received

If control change value is between 0 and 63, the

G7.1ut switches to channel A. If control change

value is between 64 and 127, the G7.1ut

switches to channel B.

Sending and receiving

G7.1ut internal data via

MIDI

The patch data stored in a G7.1ut can be sent and

received as MIDI messages (system exclusive).

When two G7.1ut units are connected via a MIDI

cable, this allows copying of patch data from the

sending unit to the receiving unit.

NOTE

When patch data are received, all existing patch

data in the G7.1ut will be overwritten. Perform the

following steps with care, to avoid accidentally

overwriting important data.

1. Using two MIDI cables, connect the

MIDI OUT and MIDI IN connectors on

the source G7.1ut to the MIDI IN and

MIDI OUT connectors on the target

G7.1ut.

(1) When a control change message

is received...

(2) The same operation as when the respective

expression pedal or switch or key at the

G7.1ut is operated occurs.

MIDI OUT

connector

MIDI IN

connector

MIDI Usage Examples

ZOOM G7.1ut

The steps at the source G7.1ut and target G7.1ut

are explained separately below.

■ Source G7.1ut

2. Set the G7.1ut to play mode and press

the [AMP SELECT/SYSTEM] key.

3. Use the [TYPE] knob to bring up the

“BulkDumpTX” (bulk dump transmit)

parameter on the display.

4. Press the [PAGE] key.

The G7.1ut is switched to bulk dump source

operation. In this condition, the G7.1ut will

automatically send patch data when it receives a

MIDI message requesting data.

To return to the previous condition, press the

[EXIT] key.

■ Target G7.1ut

5. Set the G7.1ut to play mode and press

the [AMP SELECT/SYSTEM] key.

Then use the [TYPE] knob to bring up

the “BulkDumpRX” (bulk dump

receive) parameter on the display.

6. Press the [PAGE] key.

The G7.1ut is switched to bulk dump target

operation, and a MIDI message requesting data is

sent to the source G7.1ut.

When the source G7.1ut receives this message, it

automatically sends patch data from the MIDI

OUT connector. The data are received by the

target G7.1ut, and the display changes as follows.

HINT

If you press the [EXIT] key before the indication

“Receiving...” appears, the patch data send/

receive operation is aborted and the previous

display returns.

When the patch data send/receive process is

completed, both G7.1ut units return to the AMP

SELECT/SYSTEM menu.

HINT

The web site of ZOOM CORPORATION (http://

www.zoom.co.jp) has editor/librarian software

available for download. Using this software, you

can store patch data of the G7.1ut on a computer.

MIDI

OUT

MIDI

OUT

MIDI

¡FRONT

FRONT

AMP Select 1/26

ExctePress[PAGE]

BulkDumpTX 25/26

ExctePress[PAGE]

BulkDumpRX 26/26

Receiving ...

PatchDataDump RX

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 40 41

Comments to this Manuals

No comments

Zoom B9.1ut Specifications Page 23

Comments to this Manuals

Related products and manuals for Musical Equipment Zoom B9.1ut