Zoom Player 3000B Specifications download pdf (Page 46)

■ Type 1 NORMAL (Normal Delay)

Conventional delay effect with a maximum delay

time of 2 seconds.

●Parameter 2 Time (x100 ms)

Determines the delay time in 100-ms units.

●Parameter 3 Time (x1 ms)

Determines the delay time in 1-ms units.

●Parameter 4 Feedback

Determines the delay feedback amount.

●Parameter 5 Mix (←RTM)

Determines the mixing balance between effect sound

and original sound. "0" means original sound only,

and "1.0" (100) means equal level of effect sound

and original sound.

■ Type 2 ANALOG (Analog Delay)

Analog type delay with a soft sound character. The

parameter content is the same as for type 1

(NORMAL).

■ Type 3 HOLD (Hold Delay)

This effect type samples a phrase of up two seconds

and repeats it automatically.

●Parameter 2 Time (x100 ms)

Determines the hold delay time (maximum sampling

time) in 100-ms units.

●Parameter 3 Time (x1 ms)

Determines the hold delay time in 1-ms units.

●Parameter 5 Mix (←RTM)

Determines the mixing balance between effect sound

and original sound.

■ Common parameters for type 1 - 3

●Parameter 6 SEAMLESS

This parameter controls the seamless function. For

details, please refer to the explanation of the

seamless function below.

●Parameter 7 DELAY RTM Mode

Determines the change direction and control range

for the parameter marked with "←RTM".

■ Seamless function

The seamless function lets the delay sound from the

previous patch linger on when you switch patches,

creating a smooth transition without audible breaks.

The following settings can be made for seamless

function:

• oF: Seamless function is off.

• 1 - 10: Delay sound continues for the number of

seconds set with this value, regardless of the Feedback

parameter setting of the DELAY effect.

• infinite: Delay sound continues for the duration of

the Feedback parameter setting of the DELAY effect.

• If the delay time for the patch before switching or

after switching exceeds 1 second (1001 ms or

more), the seamless function becomes inactive.

• Also if the DELAY module is set to off for the

patch after switching, a delay time setting of 1001

ms or more will cause the seamless function to

become inactive when the DELAY module is set to

off. Set the delay time to 1000 ms or less and turn

the DELAY module off.

• When hold delay is used for a patch for which the

seamless function value has been set to 1 - 10, the

sampled phrase is repeated for the specified

duration only. If the seamless function is set to

<infinite> and patch hold delay is used, the

repetition of the sampled phrase continues also

when the patch is switched (until bypass/mute is

activated).

● 44

ADVANCED GUITAR EFFECTS PROCESSOR

Effect Types and Parameters

NOTE

Conventional patch switching

Patch is switched

PATCH 1 PATCH 2

Sound is cut

Seamless function

Patch is switched

PATCH 1 PATCH 2

PATCH 1 delay

The delay sound of PATCH 1

overlaps the sound of PATCH 2

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52

Comments to this Manuals

No comments

Zoom Player 3000B Specifications Page 46

Comments to this Manuals

Related products and manuals for Musical Instrument Amplifier Zoom Player 3000B