When the FUNCTION Mode parameter is set to "3: DELAY (TAP&HOLD)" and the HOLD effect type
is selected for the DELAY module, the hold delay function can be used. While you keep the FUNCTION
switch depressed, play is sampled and then repeated by the 3000.
The effect type setting can be checked in the Edit mode. For details,
please refer to page 14.
The maximum hold time interval is 2000 ms.
The phrase is sampled for the length of the time that the FUNCTION
switch is pressed. When the switch is released, the phrase is repeated.
When the FUNCTION switch mode is set to "3: DELAY
(TAP&HOLD)", the FUNCTION LED flashes according to the
delay time. This allows you to check the current setting when
making tap input.
If the FUNCTION switch is
pressed for a longer interval
than the hold time, sampling
ends before the switch is
released, and repeat play
starts.
When the FUNCTION switch is pressed, sampling stops and the
FUNCTION LED flashes.
When the optional remote pedal RP01 is connected and DELAY
mode is selected, hold delay can be carried out only with the pedal
switch of the RP01. (For details, please refer to page 35.)
Comments to this Manuals