Zoom MRS-1044 User Manual download pdf (Page 5)

UIB-02 ONLINE MANUAL

SING

UIB-02

THE

INDOWS

NVIRONMENT

SETTING THE COMPUTER AND MRS SERIES TO THE

ONLINE STATE (WINDOWS ME/2000/XP)

1. Install the UIB-02 in the expansion slot of the MRS series.

For details on installation, refer to the separate leaﬂet supplied with the UIB-02.

2. Turn power to the computer on and start up Windows Me/2000/XP.

3. Start the MRS series in USB mode.

In USB mode, the MRS series acts as a USB device for use with a computer. To

activate the USB mode, proceed as follows.

• MRS-1044/MRS-1044CD

While holding down the [CLEAR] key, press the [POWER] switch on the rear panel to

turn the unit on. When the indication “ROM UTY MRS-1044” appears on the display,

release the [CLEAR] key and press the [AUTO PUNCH IN/OUT] key. The display

now shows the indication “USB WORKING”.

• MRS-1266/MRS-1266CD

While holding down the [CLEAR] key, press the [POWER] switch on the rear panel to

turn the unit on. When the indication “ROM UTY MRS-1266” appears on the display,

release the [CLEAR] key and press the [AUTO PUNCH IN/OUT] key. The display

now shows the indication “I/F WORKING”.

[NOTE]

For information on how to activate the USB mode for other MRS series models, refer to the

documentation of the product.

4. Connect the computer to the UIB-02 in the MRS series using an USB cable.

The computer recognizes the MRS series as a general USB device and automatically

installs the driver.

5. Open “My computer” and verify that a new local disk has been added.

If the driver has been properly installed and the computer and MRS series are in the

online state, a new local disk (volume) will be added to “My computer”. This volume

represents the hard disk in the MRS series.

1 2 3 4 5 6 7 8 9 10 ... 16 17

No comments

Zoom MRS-1044 User Manual Page 5