Zoom 708II Bass Specifications download pdf (Page 7)

ZOOM 708II BASS

Make sure that the amplifier and the

708II are off.

Turn the volume at the amplifier to minimum.

To power the unit from the AC

adapter, insert the small plug of the

adapter cable into the [DC 9V] jack on

the 708II. Then plug the adapter into

an outlet.

Connect the bass to the [INPUT] jack

of the 708II, using a mono cable.

Connect the [OUTPUT/PHONES] jack

of the 708II to the bass amplifier,

using a mono cable.

You can also use a Y cable to supply the signal

in stereo to two amplifiers.

To monitor the sound with headphones,

plug the phones into the [OUTPUT/

PHONES] jack.

Turn power on in the following order:

708II

→

amplifier.

If you turn the 708II on while the amplifier is

already powered up, damage to the speaker may

result. Always turn power to the amplifier on last.

Raise the volume setting of the

instrument and amplifier, and adjust

the [OUTPUT] knob on the rear panel

of the 708II.

NOTE

Preparations

AC adapter

Bass amplifier

Bass

CD player or similar

Headphones

Getting Connected

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

No comments

Zoom 708II Bass Specifications Page 7