Zoom 708II Bass Specifications download pdf (Page 39)

ZOOM 708II BASS

■ No sound, or very low volume

•Isthe correct AC adapter connected, and the power

switch set to ON?

Refer to "Getting Connected" on page 7 and turn the

power on.

•Are [INPUT] jack and [OUTPUT/PHONES] jack

connected correctly to the instrument and amplifier?

Refer to "Getting Connected" on page 7 and establish

correct connections. Check volume settings at

instrument and amplifier.

•Isthe shielded cable defective?

Try replacing the cable.

•Is708II set to mute condition?

Cancel the mute condition.

•Is[OUTPUT] knob turned down?

Set knob to suitable position.

•Isexpression pedal raised?

For some patches, the expression pedal controls the

volume. Set it to a suitable position.

• Is the PICKUP SELECTOR module set correctly,

according to the pickup type of the bass guitar?

■ Cannot record from [AUX IN] jack

Is input source set to "BASS"? Set it to "AUX".

■ Sound is unnaturally distorted

• Is the PICKUP SELECTOR module set correctly,

according to the pickup type of the bass guitar?

• Adjust LEVEL parameters of modules, and GAIN

parameter of DRIVE module.

■ High noise levels

• Adjust ZNR parameter. If problem persists, try

reducing GAIN.

• Is the PICKUP SELECTOR module set correctly,

according to the pickup type of the bass guitar?

■ Cannot play rhythm pattern or volume is

very low

•Isrhythm volume set to low value?

Adjust parameter knob 3 to obtain suitable volume.

■ Expression pedal on/off switching does not

work properly.

•Try the procedure described in "Adjusting the

Expression Pedal" on page 25.

■ SmartMedia card cannot be used

•Is[SMART MEDIA] LED lit?

Turn unit off and check whether SmartMedia card is

inserted properly.

•Iscorrect SmartMedia card used?

The 708II can use SmartMedia cards with a capacity

from 16 to 128 MB (designed for 3.3V).

•Has SmartMedia card been formatted?

Be sure to format the SmartMedia card in the 708II

before use, as described on page 31.

Troubleshooting / Specifications

Troubleshooting

Specifications

◆

Effect Programs

69 types

◆

Effect Modules

7 modules

◆

Sampler Function

Maximum recording duration 6

seconds (without SmartMedia)

16-bit linear record/playback

(MOD and REV modules are

temporarily turned off when

sampler function is used)

◆

Patch Memory

USER: 6 banks x 10 = 60

(rewritable, with store)

PRESET: 6 banks x 10 = 60

Total 120 patches

◆

Sampling Frequency

31.25 kHz

◆

A/D Conversion

20-bit, 64-times oversampling

◆

D/A Conversion

20-bit, 8-times oversampling

◆

Input

Bass input: standard mono

phone jack (nominal input

level -20 dBm, input

impedance 500 kilohms)

AUX IN: miniature stereo

phone jack (nominal input

level - 20 dBm, input

impedance 20 kilohms)

◆

Output

Combined line/headphone

output

Standard stereo phone jack

(maximum output level = +3

dBm with output load

impedance of 10 kilohms or

higher)

◆

Display

6-position alphanumeric LED

display

2-position 7-segment LED

display

◆

Power Requirements

AC adapter (available

separately)

9 V DC, center minus, 300 mA

(ZOOM AD-0006)

Batteries: IEC R6 (size AA) x

Continuous operation: approx.

11 hours (with alkaline

batteries)

◆

External Dimensions

249 mm (W) x 195 mm (D) x

57 mm (H)

◆

Weight

860 g (without batteries)

*0 dBm = 0.775 Vrms

* Design and specifications subject to change without notice.

1 2 ... 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Zoom 708II Bass Specifications Page 39

Comments to this Manuals

Related products and manuals for Musical Instruments Zoom 708II Bass