Zoom Hyper Lead HL-01 Operations Instructions download pdf (Page 45)

Recording Audio Signals

45

Recording

Four channels (CH-1/CH-2/CH-3/CH-4) of audio

can be recorded (Linear PCM recording) in

synchronization with video recording.

You can use the built-in stereo microphones

(omni-directional electret condenser

microphones) or 2-channel external audio inputs

to the AUDIO IN connectors by switching with

the AUDIO IN switches.

Set the AUDIO IN switches, both CH-1 and

CH-2 (page 16), to INT.

1 Set the AUDIO IN switches CH-1 and

CH-2 to EXT.

2 Connect external audio sources to the

AUDIO IN connectors CH-1 and CH-2

(page 14).

3 Set the input (LINE/MIC/MIC+48V)

switches CH-1 and CH-2 (page 14) to

LINE (line level: +4 dBu).

You can use an external microphone for

recording, such as the ECM-673 Electret

Condenser Microphone.

1 Lift up the handle of the external

microphone holder (page 14) and open

the cover.

2 Attach a microphone, then return the

external microphone holder cover to its

original position to secure it.

3 Connect the microphone cable to the

AUDIO IN CH-1/CH-2 connectors.

4 Set the corresponding AUDIO IN

switch (CH-1/CH-2) (page 16) to EXT.

5 Set the corresponding input (LINE/

MIC/MIC+48V) switch (CH-1/CH-2)

(page 14) according to the connected

microphone.

MIC: For a microphone that requires no

power supply

MIC +48V: For a microphone that requires

+48V power supply (such as the ECM-

673)

To adjust the levels automatically (AGC)

When the AUDIO SELECT switches CH-1 and

CH-2 (page 16) are set to AUTO, the audio

recording levels are automatically adjusted.

Recording Audio Signals

Using the Built-in Stereo

Microphones

Using External Inputs

Using an External Microphone

Adjusting the Audio Recording

Levels

External

microphone

to AUDIO IN

Cable clamp

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 139 140

Comments to this Manuals

No comments