Zoom Hyper Lead HL-01 Operations Instructions download pdf (Page 41)

Changing Basic Settings

Recording

Notes

• When the Direct menu is in Part mode, you cannot turn

the shutter on/off with the Direct menu if the

SHUTTER switch is set to ON.

If the SHUTTER switch is set to OFF, you can switch

only between Auto Shutter and Shutter OFF.

• The Direct menu cannot be selected when Full Auto

mode is turned on (page 36) or when the SLS/EX SLS

mode is set.

Shooting in SLS/EX SLS Mode

The shutter speed is specified in the number of

accumulated frames. Up to 64 frames can be

accumulated in this mode, permitting you to

obtain low-noise clear pictures in low light levels

or surreal pictures with afterimages.

PMW-200: For SLS, set “Mode” to “SLS” with

“Shutter” (page 80) in the CAMERA SET menu

and specify the number of accumulated frames

with “SLS Frame.” You can select in the range of

2 to 8 frames.

When Full Auto mode (page 36) is ON or Auto

Shutter mode is ON, SLS cannot be set.

For EX SLS, set “Setting” to “On” with “EX

Slow Shutter” (page 80) in the CAMERA SET

menu and specify the number of accumulated

frames with “Number of Frames.” You can select

from among 16, 32, and 64 frames.

When also Full Auto mode (page 36) is ON or

Auto Shutter mode is ON, EX SLS can be set.

PMW-100: Select “SLS/EX SLS” (page 81) in

the CAMERA SET menu and set the number of

accumulated frames. For EX SLS, set 16, 32, or

64.

This can also be set when Full Auto mode (page

36) is turned on.

Shooting in Auto Shutter Mode

The shutter speed is automatically adjusted

according to the picture brightness.

When you set the camcorder to Full Auto mode

(page 36), Auto Shutter is forcibly selected.

When Full Auto mode is off, you can

independently turn Auto Shutter mode on by

setting “Auto Shutter” in “TLCS” (page 84) in the

CAMERA SET menu to “On.”

Adjust the brightness according to the subject.

Recording in auto mode

When Full Auto mode (page 36) is set to ON:

Iris (PMW-200) or Exposure (PMW-100) is

forcibly set to Auto mode.

When Full Auto mode is set to OFF:

PMW-200: When the IRIS switch is set to

AUTO, Auto Iris mode is set.

PMW-100: You can turn it on by setting

“Exposure” (page 85) in the CAMERA SET

menu to “Auto.” You can also set “Auto”/

“Manual” for “Exposure” to an assignable button

(page 48).

You can select the target level (to make the

picture darker or brighter) for Auto Iris (PMW-

200) or Exposure (PMW-100) via the Setup menu

or Direct menu. (The gain control in AGC mode

and the shutter speed control in Auto Shutter

mode are adjusted in synchronization.)

To adjust the target level with the Setup menu

Set “Level” in “TLCS” (page 84) in the

CAMERA SET menu.

To adjust the target level with the Direct menu

The target level can also be selected using the

Direct menu (page 20). When you press the

DISPLAY button, the current Exposure position

is displayed on the screen (page 19).

Adjusting the brightness manually

PMW-200: When Full Auto mode is set to OFF,

setting the IRIS switch to MANUAL sets to

Manual Iris mode. Rotate the iris ring for the

desired iris opening.

PMW-100: When Full Auto mode is set to OFF,

set “Exposure” (page 85) in the CAMERA SET

menu to “Manual” to use Manual mode. When

Manual mode is set, rotate the EXPOSURE dial

(page 13) to adjust the brightness. (Rotate the dial

clockwise while facing the front of the camcorder

to increase the brightness.) You can turn Manual

mode on/off by pressing the EXPOSURE button

(page 13).

Operating Zoom manually

PMW-200: Setting the ZOOM switch (page 17)

on the bottom of this unit to the MANUAL

position sets to manual zoom mode.

Iris (PMW-200) / Exposure (PMW-

100)

Zoom

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 139 140

Comments to this Manuals

No comments

Zoom Hyper Lead HL-01 Operations Instructions Page 41

Comments to this Manuals

Related products and manuals for Camcorders Zoom Hyper Lead HL-01