Zoom 2100 Instruction Manual Page 196

  • Download
  • Add to my manuals
  • Print
  • Page
    / 212
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 195
196
TROUBLESHOOTING (Cont.)
SYMPTOM
The flash does not fire.
POSSIBLE CAUSES
1 The flash is pushed
down.
2 The subject is lighted.
3 The drive mode is set to
.
4 Panorama recording is
taking place.
5 The Picture effect is set
to WHITE BOARD/
BLACK BOARD.
CORRECTIVE ACTION
1 Slide the Flash switch to raise
the flash.
2 Set the flash to Fill-In mode.
3 Press the DRIVE button to set
to the single-picture mode.
4 Stop Panorama recording.
5 The flash does not fire in the
WHITE BOARD/BLACK
BOARD mode.
REF. PAGE
P. 72
P. 108
P. 107/108
P. 117
P. 135
P. 137
SYMPTOM
Pictures you have already taken do not appear on the monitor.
POSSIBLE CAUSES
1 The camera is in the
Record Mode.
2 There is no picture in the
card.
3 There is a problem with
the card.
4 The camera is
connected to a TV.
5 The viewfinder is on but
there is no display.
CORRECTIVE ACTION
1 Set the Mode dial to .
2 NO PICTURE appears on the
monitor. Record pictures.
3 See the Error code chart.
4 The monitor does not function
when the camera is
connected to a TV.
5 Press to switch to the
monitor.
REF. PAGE
P. 44
P. 124
P. 68–70
P. 203
P. 204
P. 76
P. 124
SYMPTOM
The viewfinder display is not clear.
POSSIBLE CAUSES
1 The diopter is not
adjusted properly.
2 The brightness is not
adjusted properly.
CORRECTIVE ACTION
1 Adjust the diopter again.
2 Adjust the brightness. It is
possible to adjust the
viewfinder and monitor
independently.
REF. PAGE
P. 64
P. 163
Page view 195
1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 211 212

Comments to this Manuals

No comments