Zoom RFX-2200 Specifications download pdf (Page 4)

Rack Mounting/Getting Connected

OUTPUT

RETURN

SEND

L/MONO

INPUT

BYPASS

FS01

RFX-2200

Mixer or MTR

FS01

OUTPUT BYPASS

FS01

INPUT

L/MONO

MIC IN

INPUT

Guitar

Guitar effect

Rhythm machine, synthesizer, or similar

RFX-2200

Mixer or

amplifier/speaker

Microphone

FS01

8888

This is an example for inserting the RFX-2200 between the

sound source such as a microphone or instrument and a

playback system or multi-track recorder (MTR). A stereo

source should be connected to the INPUT L/MONO and R

jacks. A mono source should be connected to the L/MONO

jack only.

In this example, the balance between original sound and effect

sound is adjusted with the MIX control of the RFX-2200.

When a component with an S/PDIF digital input (such as a

digital multitrack recorder, MD recorder, or DAT recorder) is

used, the connection can be made in the digital domain.

This section shows how to connect the RFX-2200 to the sound source and to the playback system.

This is an example for connecting the RFX-2200 to the

send/return jacks of a mixer or multi-track recorder. Connect

the send jack of the mixer or MTR to the INPUT L/MONO

jack of the RFX-2200, and connect the OUTPUT L/R jacks of

the RFX-2200 to the return jacks (or the stereo line input

jacks) of the mixer or MTR.

When a component with an S/PDIF digital input (such as a

digital multitrack recorder, MD recorder, or DAT recorder) is

used, the connection can be made in the digital domain.

In this configuration, the MIX control of the RFX-2200 should

be set so that it outputs only the effect sound, and the balance

between original sound and effect sound should be adjusted at

the mixer or multi-track recorder. If the mixer or multi-track

recorder has a stereo send output, supplying the send signal to

the RFX-2200 in stereo is also possible.

Insert Connection

Send/Return Connection

The RFX-2200 is compatible with international 19-inch rack

standards (EIA, DIN). Because the unit has been designed for

rack installation, it is preferable to operate the unit in this

way, rather than simply placing it on a table or similar. Align

the four screw holes with the rack screw holes and securely

fasten the unit to the rack with screws.

• The RFX-2200 uses a metal frame, making

the unit heavier than it might seem at first

glance. While installing the unit in a rack,

carefully support the weight of the unit

until all screws are securely tightened.

Otherwise the unit may drop, possibly

causing injury to persons or damage to

itself or to other equipment.

• Do not directly stack the unit on top of

other equipment. Otherwise heat may

lead to a fire risk or cause performance

degradation.

• Before installation, always unplug any connecting

cables and the power cable. Otherwise the

equipment or the cables may be damaged.

• Make sure that the rack in which the unit is

installed is placed on a firm, solid surface, so that

it cannot shake or topple over. Otherwise there is

a risk of injury to persons or damage to the unit

or to other equipment.

Caution

Rack Mounting

Getting Connected

ZOOM RFX-2200

1 2 3 4 5 6 7 8 9 ... 27 28

Comments to this Manuals

No comments

Zoom RFX-2200 Specifications Page 4

Comments to this Manuals

Related products and manuals for Musical Instrument Amplifier Zoom RFX-2200