Zoom RFX-2200 Specifications download pdf (Page 10)

ZOOM RFX-2200

Using the MIDI Control Function

Setting the MIDI Channel

Selecting Patches Via MIDI

Storing Program Change Numbers in the Learn Table

The RFX-2200 can accept commands via a MIDI link for patch switching, parameter control, and transfer of memory contents to

an external MIDI device. This section describes the general steps for using MIDI based functions.

1. In play mode, press the MIDI key once.

The indication "CH" and the currently selected MIDI

channel are shown alternately on the display.

2. Use the VALUE UP/DOWN keys to select a

MIDI channel between 1 and 16. When the

display shows "--", the MIDI send/receive

function is disabled.

3. Press the CANCEL key to return to the play

mode.

CANCEL key

Press once

Shown

alternately

MIDI key

1. Connect the MIDI OUT connector of the

external MIDI device to the MIDI IN connector

on the RFX-2200.

The MIDI channel setting at the RFX-2200 must match

the MIDI send channel setting at the external device.

2. Send a program change message from the

external MIDI device to the RFX-2200.

In the factory default condition, the RFX-2200 patch

numbers correspond to the following program change

numbers.

• When the patch is switched at the RFX-2200, a

corresponding program change message appears at the

MIDI OUT connector.

RFX-2200

patch number

Program

change number

127

1. In play mode, select the patch to which you

want to assign a program change number and

press the MIDI key two times.

The indication "PC" and the indication "--" are shown

alternately on the display.

2. Send a program change message from the

MIDI device connected to the MIDI IN

connector of the RFX-2200.

The display indication "--" changes to the received

program change number. This program change number is

now assigned to the currently selected patch.

3. To assign a separate program change number

to this patch, repeat step 2.

It is also possible to assign multiple program change

numbers to the same patch number.

4. When the setting is complete, press the

CANCEL key to return to the play mode.

If necessary, repeat steps 1 - 4 for other patch numbers

and program change numbers.

• The program change numbers 100 - 127 are shown on

the display as ".0" - "2.7".

• The changed learn table information is retained also

when the unit is turned off. (For information on how to

return the learn table to the factory default setting, see

page 13.)

CANCEL key

Press twice

Shown

alternately

MIDI key

To switch the patch of the RFX-2200, a program change message must be sent from a MIDI keyboard or sequencer or similar

device to the RFX-2200.

Sometimes it may be desirable to assign specific program change numbers to the patch numbers of the RFX-2200. (For example

to call up patch number 1 of the RFX-2200 when the tone associated with program change 100 of a synthesizer is selected.) In

such a case, you can use the so-called learn table in the memory of the RFX-2200 to change the program change number assigned

to the patch number.

Set the MIDI channel for communication with the RFX-2200 as follows.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Comments to this Manuals

No comments

Zoom RFX-2200 Specifications Page 10

Comments to this Manuals

Related products and manuals for Musical Instrument Amplifier Zoom RFX-2200