Zoom RFX-2000 Specifications download pdf (Page 13)

Returning the RFX-2000 to the Factory Default Settings

ZOOM RFX-2000

You can return the entire RFX-2000 or individual patches to the factory default condition.(Recall) This is useful if an original

patch was overwritten by mistake or when wishing to return the entire unit to the original state.

Note:

When the recall function is carried out, data stored in memory by the user will be lost. Make sure that these data are no

longer needed before carrying out this function.

Data Transfer (Receive)

sending RFX- 2000 and the indication "dr" on the display

of the receiving RFX-2000.

When the transfer is completed, the units automatically

revert to play mode.

• When "AL" was selected for sending

All patch data and learn table data in the memory of the

receiving RFX-2000 are overwritten.

• When "current patch number" was selected

for sending

The currently edited patch data are overwritten.

Perform store as necessary.

5. To record data on an external MIDI sequencer

or other MIDI device, set the device to the

recording mode and press the STORE key.

When the transfer is complete, stop recording at the

external MIDI device and perform any necessary steps

for storing the data on the device.

• When wishing to abort the data send process, press the

CANCEL key instead of the STORE key in step 4.

Note:

The RFX-2000 sends several system exclusive data in

succession. If a MIDI data recorder is used which stops

recording after receiving one set of system exclusive

data, the data of the RFX-2000 may not be stored

correctly.

1. Connect the MIDI OUT connector of the

external MIDI device (sequencer etc.) to the

MIDI IN connector on the RFX-2000.

2. Perform playback at the external MIDI device.

• When "AL" was selected for sending

All patch data and learn table data in the memory of the

receiving RFX-2000 are overwritten. The indication

"dr" flashes on the display while data are being

received.

• When "current patch number" was selected

for sending

The currently edited patch data are overwritten.

Perform store as necessary.

• When sending data to or loading data from an external

MIDI device, the RFX-2000 and the device must be set

to the same MIDI channel. Otherwise data will be

disregarded by the RFX-2000 also if playback is

performed on the external MIDI device.

• Playback at the external MIDI device must be performed

at the same tempo as recording. If the tempo is faster,

the RFX-2000 may not receive the data properly.

3. After data have been loaded into the RFX-

2000, stop playback at the external MIDI

device.

1. Turn on the power to the RFX-2000 while

keeping the STORE key depressed.

The indication "FA" is shown while the STORE key is

held down.

When you release the STORE key, "AL" flashes on the display.

2. Use the VALUE UP/DOWN keys to select the

recall contents.

• AL

Return all patch data and the learn table to the factory

default condition.

• 01 - 99, 00

Only the selected patch data are returned to the factory

default condition.

• PC

Only the learn table is initialized (returned to the

factory default condition).

3. To carry out the recall operation, press the

STORE key once more.

• When AL or PC was selected in step 2

Recall is carried out and the unit reverts to the play

mode.

• When a specific patch number was selected in

step 2

The unit stays in the recall mode, and recall is carried

out subsequently for any specified patch numbers.

To stop the recall operation, press the CANCEL key.

POWER

STORE STORE

STORE key

STORE key release

POWER switch

Using the MIDI Control Function/Returning the RFX-2000 to the Factory Default Settings

This section describes how to load patch data and learn table data stored on an external MIDI device back into the RFX-2000.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Comments to this Manuals

No comments

Zoom RFX-2000 Specifications Page 13

Comments to this Manuals

Related products and manuals for Musical Instrument Amplifier Zoom RFX-2000