Zoom BFX-708 Specifications download pdf (Page 5)

ZOOM BFX-708

5

Preparations

1 Use a monaural cable to connect the bass

to the INPUT jack of the BFX-708.

At this time, the amplifier power switch and the

power switch of the BFX-708 should be OFF.

2 Use a monaural cable to connect the

OUTPUT jack of the BFX-708 to the input

of the amplifier.

By using two amplifiers, you can get great

stereo sound from stereo effects. Use a stereo

Y cable to connect the OUTPUT jack to the

two amplifiers.

3 To monitor the sound with headphones,

connect the headphones to the OUTPUT

jack.

4 Verify that the amplifier is turned off and

that the volume control is turned to

minimum. Also verify that the power switch

of the BFX-708 is set to OFF.

5 When using an AC adapter, plug the output

cable from the adapter into the DC 9V jack

on the BFX-708 and plug the adapter into

an AC outlet.

To guard against inadvertently disconnecting

the AC adapter cable, wind the cable once

around the hook on the rear panel of the BFX-

708.

6 Turn on power in the order BFX-708 →

amplifier (playback equipment).

7 Adjust the volume of the amplifier and the

BFX-708 to a suitable position while

playing the instrument.

The OUTPUT knob of the BFX-708 should be

set to about the 3 o'clock position, and the AMP

SIM knob should be set to the OFF position.

When the BFX-708 is in the bypass state (all

effects are temporarily turned off; see page

10), the output level will be the same as the

input level if the OUTPUT knob is turned fully

clockwise.

DC9V

POWER

INPUT

(AUX IN)

OUTPUT

(PHONES)

300mA

OFFON

AC adapter

Bass amplifier

Bass

Headphones

Monaural cable

Monaural cable

Getting Connected

HINTHINT

OUTPUT AMP SIM

OFF

OFF

V

POWER

OUTPUT

(PHONES)

A

OFFON

Two bass amplifiers

Stereo Y cable

HINTHINT

NOTE

1 2 3 4 5 6 7 8 9 10 ... 23 24

Comments to this Manuals

No comments