Zoom 1204 Specifications Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 38
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
Trying out the 1204
Power-on
1. With all power switches set to OFF, connect the 1204 and all other devices.
Caution: Set input and output level controls on all devices to minimum.
2. Switch the devices on in the following order (for turning the power off, proceed in the opposite order):
(1) Instruments or other sound source to be used as input for the 1204
(2) 1204 (manual mode is activated automatically)
(3) Playback system
3. Adjust the level of the instrument or other sound source or the mixer send level to a suitable setting.
4. Adjust the INPUT control of the 1204 while playing the instrument or supplying a sound source signal.
The PEAK indicator of the 1204 should light up occasionally at signal peaks.
5. Adjust the MIX LEVEL control of the 1204 for the desired balance between DRY and WET sound.
6. Adjust the OUTPUT control of the 1204 and the input level control of the playback system or mixer
return input to a suitable position.
7. Adjust the output level control of the playback system to a suitable position.
Selecting an effect
Try selecting an effect as follows.
1. Set the EDIT1 and EDIT2 controls and the EQ LOW and EQ HIGH controls to the center position.
Note: The MIX LEVEL control should be set to any suitable position for the system requirements.
2. Set the PATTERN selector to "1 (DEMO)".
Note: This setting activates a pattern recommended by ZOOM for the various effects.
3. Use the BANK switch to select the bank (A or B) that contains the desired effect.
4. Turn the EFFECT selector to the position where the name of the desired effect is shown.
The effect is now selected.
Selecting a pattern
Next, try selecting a pattern.
1. Select an effect as described above.
2. Use the PATTERN selector to select any desired pattern.
Note: The action of the pattern depends on which type of effect is selected. For details, please refer to the
chapter "Effect Types, Effect Patterns, Effect Parameters" on page 24.
The pattern is now selected.
16
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 37 38

Comments to this Manuals

No comments