Zoom 9000 Specifications download pdf (Page 23)

Factory-set Patches

The 9000 has the original Patch data which is the same as the factory-set Patch data, in

the ROM (Read-Only-Memory) of the 9000. If you have accidentally deleted or changed

the factory-set Patches, the factory-set Patch data for any individual Patch or the entire

set, can be retrieved and stored from the ROM.

· In the Play mode, press the AMP/LINE key for ONE SECOND or more,

while holding down the EDIT/CANCEL key.

The display contents change as shown in the following figure. This indicates that the

preset Patches are ready to be retrieved.

Displayed Items in the Preset Recall Standby status.

· Select the Patch you want to retrieve, using the BANK DOWN/UP

key(s) and the PATCH 1 to 4 key(s). In this case, the sound of the

effect can be monitored.

n To store the Patch in memory, - press the STORE key. This operation puts the

9000 in the Standby status. Then, select the Bank and Patch numbers to store the

retrieved Patch data in. Then press the STORE key again (if you want to stop the

operation, use the EDIT/CANCEL key instead.)

n To edit the Patch, - press the CANCEL key. The 9000 goes into the Play mode

with the Patch unchanged. Then, put the 9000 in the Edit mode, using the

EDIT/CANCEL key.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 44 45

No comments

Zoom 9000 Specifications Page 23