Zoom 9000 Specifications download pdf (Page 20)

For example, while the REV Effect Module is selected from REV1, pressing the

VALUE - / + key(s) changes the Effect Type as shown in the following figure.

Press the PARAMETER (AMP/LINE) key, select the parameter to be changed.

Each Effect Type uses the parameter settings independent from another Effect Type (the

function of the parameters can be considered as the effect controls on an independent

stomp box effect). Pressing the PARAMETER key displays the parameters for the

selected effect in sequential order, looping around to the first again with repeated presses

of the key..

Helpful hint:

When wishing to return to the effect type selection after pressing the PARAMETER

(AMP/LINE) key, use the BANK DOWN/UP key(s) and the PATCH 1 to 4 keys to select

the same effect module and then repeat the above steps.

The following figure shows an example when the parameters for Effect Type REV2 is

changed.

Example of a Parameter Change

· Press or hold down the VALUE - / + key(s).

The value of the parameter changes.

Changing the Value of the Parameter

In the same way, press the PARAMETER (AMP/LINE) key to select another parameter,

and set the value with the VALUE - / + key(s).

Helpful hint:

When wishing to edit another effect module, use the BANK DOWN/UP key(s) and the

PATCH 1 to 4 keys to select the effect module, and then repeat the above steps.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 44 45

No comments

Zoom 9000 Specifications Page 20