Zoom MRS-4 User Manual download pdf (Page 5)

Power on/off switching

To turn the MRS-4 on or off, proceed as

follows.

Make sure that the MRS-4 and all

other devices are turned off.

Turn down the volume at the source

equipment, MRS-4, and monitor system.

Insert the SmartMedia card into

the SmartMedia card slot on the

front panel of the MRS-4, as

described on page 5.

Set the [POWER] switch of the

MRS-4 to ON.

The MRS-4 starts up.

Turn the monitor system on.

Turn the monitor system off.

Set the [POWER] switch of the

MRS-4 to OFF.

The indication "POWEROF" (power off)

appears on the display, and the MRS-4 shuts

down.

Always follow the above procedure, and do not

remove the SmartMedia card without first turning

off the power. Otherwise data may be destroyed.

◆ Caution ◆

When operating the unit with the AC

adapter, always use the [POWER]

switch of the MRS-4 to turn the unit

on and off. Never disconnect the AC

adapter while the card access

indicator is lit. Otherwise data may be

destroyed.

Operating the unit on

batteries

The MRS-4 can be powered from batteries

(not supplied). Follow the steps below to

insert the batteries.

Turn the unit over and open the

battery compartment cover.

Insert four fresh IEC R6 (size AA)

batteries into the battery

compartment. The use of alkaline

batteries is recommended.

Close the battery compartment

cover.

If the indication "[ ]" flashes while the unit

is powered from batteries, the batteries are

exhausted. Replace the batteries as soon as

possible.

NOTE

Four IEC R6 (size AA) batteries

MRS-4 underside

NOTE

Tur ning power off

Tur ning power on

Connections

ZOOM MRS-4

Connections

When a line level signal such as that from a CD player or rhythm machine

is connected to the AUX IN [L/MONO]/[R] jacks, it will be output from

the MASTER [L]/[R] jacks together with the mixed playback signal from

the tracks of the MRS-4. For a stereo device, use both the [L/MONO] and

[R] jacks. For a mono device, use only the [L/MONO] jack.

Connect the monitor system

or master recorder to the

MASTER [L]/[R] jacks.

To power the MRS-4 from an

AC outlet, be sure to use only

the AC adapter ZOOM AD-

0006 (available separately).

Using another kind of AC

adapter may result in damage.

To synchronize operation of

the recorder section of the

MRS-4 with another MIDI

device, connect the [MIDI

OUT] connector of the MRS-

4 to the MIDI IN connector

of the other device

To monitor with headphones,

plug them into the [PHONES]

jack. This jack carries the

same signal as the MASTER

[L]/[R] jacks

Headphones

Multi-effect such

as 505II

Mic

Guitar

Monitor system

Master recorder

Rhythm machine,

MIDI sequencer or

other MIDI device

AC adapter

CD player or other external source component

Loop the cable of the AC

adapter around the hook as

shown in the diagram before

connecting it to the [DC 9V]

jack. This will prevent the plug

from being pulled out if the

cable is accidentally pulled.

1 2 3 4 5 6 7 8 9 10 ... 32 33

Comments to this Manuals

No comments

Zoom MRS-4 User Manual Page 5

Comments to this Manuals

Related products and manuals for Hardware Zoom MRS-4