Zoom MRS-4 User Manual download pdf (Page 17)

Moving to a desired

point in a song (Locate

function)

You can specify a location within the song in

time units (minutes/seconds/milliseconds),

and move to that location.

While the main screen is shown,

press the right [PARAMETER/

VALUE] key once.

The indication "M" flashes on the display.

Use the left/right [PARAMETER/

VALUE] keys to move the flashing

indication.

To show the current position in minutes, "M"

should be flashing. For indication in seconds,

"S" should be flashing. For indication in

milliseconds, "mS" should be flashing.

Use the up/down [PARAMETER/

VALUE] keys to change the

numerical indication for the

currently selected unit.

While holding down the key for one

direction, pressing the key for the other

direction will cause a rapid change.

When the numbers have been changed, the

unit is at the corresponding song position.

Pressing the PLAY [

] key will start

playback from that point.

To return to the main screen,

repeatedly press the left

[PARAMETER/VALUE] key until the

flashing stops.

Switching between time

and measure indication

The current point can be shown on the

display either as time or in measures.

While the main screen is shown,

press the left/right [PARAMETER/

VALUE] keys repeatedly until the

measure and beat indication is

shown on the display.

The display switches to measure indication

(measure number/beat count). When the

transport keys are used in this condition to

move in the song, the measure number/beat

count indication changes accordingly.

• The measure number and beat count shown

here have been converted using the

NOTE

Measure

Beat

If the measure indication and time indication

do not match, this symbol is shown.

5-1O

0145966

0146966

0145965 0145965 0145965

0145965

Flashing

Reference [Locating a Point]

ZOOM MRS-4

Move to the point at which you want

to punch-out, and press the [AUTO

PUNCH IN/OUT] button once more.

This sets the "Out point" at which recording will

end. The [AUTO PUNCH IN/OUT] button

changes from flashing to constantly lit.

The In/Out points can also be set while the

recorder is operating.

Carrying out auto punch-in/out

Move to a point several measures

earlier than the In point.

Repeatedly press the status key of

the track on which you want to

punch-in/out, until the key is

flashing in red.

If you want to rehearse the auto

punch-in/out, press only the PLAY

[

] key. To actually carry out auto

punch-in/out, hold down the REC

[

] key while pressing the PLAY

[

] key.

●

If only PLAY [R] key was pushed

(rehearsal)

When the In point is reached, the track on

which you are punching-in/out will be muted.

When you reach the Out point, muting will

be defeated. (You will always be able to

monitor the input signal during this time.)

Performing this action will not record

anything on the track.

●

If REC [O] key + PLAY [R] key were

pushed (actual operation)

When the In point is reached, recording will

begin automatically (punch-in). When the

Out point is reached, recording will end

automatically, and playback will resume

(punch-out).

When punch-in/out is complete,

press the STOP [

] key.

The display briefly shows "WAIT".

The length of the "WAIT" interval depends on

setting conditions.

10.

To listen to the recorded result,

press the status key for the track

on which you performed punch-

in/out until the key is lit in green.

Then move to a location earlier

than the In point and press the

PLAY [

] key.

If you want to re-do the recording, repeat

steps 6 – 9.

11.

When the results are as desired,

press the [AUTO PUNCH IN/OUT]

key so that the key goes out.

The auto punch-in/out function is turned off,

and the In point and Out point settings are

discarded.

NOTE

Track

Playback Playback

Record

In point Out point

Track

Playback Playback

Mute

In point Out point

HINT

ZOOM MRS-4

Reference [Recorder]

Reference [Locating a Point]

This section describes how to quickly move to any desired point in a song.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 32 33

Comments to this Manuals

No comments

Zoom MRS-4 User Manual Page 17

Comments to this Manuals

Related products and manuals for Hardware Zoom MRS-4