Zoom 3035 User Manual download pdf (Page 15)

Your telephone service may include Call Waiting that you can

temporarily suspend by using your phone to dial a special code.

(For example, in the U.S., you can disable call waiting by adding

*70 to your dialing prefix; please check with your local phone

company for the correct code for your area.) You can include

that code, followed by a comma, in the dial string or dial prefix in

your software.

If your software does not handle AT commands automatically, it

should provide a place to enter AT commands in its setup

menus. However, in some cases you may need to enter AT

commands directly to the modem, using a communications pro-

gram such as Windows HyperTerminal.

Using Terminal Mode to

Enter AT Commands

Start your communications program.

• To use Windows HyperTerminal:

1 Select Start > Programs > Accessories > (Communications >)

HyperTerminal.

2 Follow the prompts and then, in the HyperTerminal window,

type AT plus the command you need and press Enter. You

will see an OK response.

• If you are using another communications program, check

your software documentation for instructions.

To return to the factory default settings for the modem, type AT

&F and press Enter while in terminal mode.

Refer to the troubleshooting solutions that start on page

20 for

help using AT commands.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 32 33

No comments

Zoom 3035 User Manual Page 15