Zoom 3035 User Manual

PCI Express Modem USER GUIDE

(Type 2 Caller ID) service from your telephone company to use the modem’s Call Waiting/Caller ID feature. When you power on your computer after instal

11 2 Important Information for Owners of V.92 Modems With V.92, as with the earlier V.90 standard, your connection speed depends on your phone

_________________________________________________________12 Note: If you want to manually change the way your modem connects, please consult the AT c

13 3 Communicating with Your Modem The fax and communications software that came with your mo-dem sets itself up automatically and takes care o

_________________________________________________________14 • If you are asked to select the modem type from a menu, and you don’t see this modem lis

15 Your telephone service may include Call Waiting that you can temporarily suspend by using your phone to dial a special code. (For example, i

_________________________________________________________16 4 Troubleshooting If your modem stops working, please read this section carefully before c

17 Freeing up Resources in BIOS under Windows This procedure is a little more difficult than the previous one, but with the help of your compu

_________________________________________________________18 11 Click the Resources tab. 12 Clear the Use automatic settings check box. 13 Scroll t

19 that does not already have a device assigned to it is avail-able for use. All Windows operating systems: When PCI bus IRQ steering is enable

Important Safety Measures • To reduce the risk of fire, use the supplied phone cord or an AWG 26 or larger UL-listed or CSA-certified phone cord

_________________________________________________________20 Solution The most common error with modems is that the communica-tions software is not con

21 If the software does not have speaker settings, add one of the AT commands listed below to the initialization string: L1 for low volume L2

_________________________________________________________22 mands). Consult your voice software’s documentation to deter-mine whether it supports TAPI

23 To force different communication speeds Type these AT commands and press Enter Disable both 56K and auto rate on V.34—33600 bps AT+MS=V34,1

_________________________________________________________24 Problem Your V.92 modem does not connect reliably at V.92. Solution Make sure that you hav

25 Problem Your modem disconnects while communicating with a remote system. Solution The remote system has hung up, and you need to reconnect.

_________________________________________________________26 Problem Modem performance seems sluggish. Solution If you are connected to the Internet, t

27 5 Firmware Upgrades Your modem’s software or firmware can be easily upgraded to include updates and feature enhancements. To upgrade, you si

Appendix A Uninstalling the Modem The following instructions should work for your new PCI Express modem as well as older PCI modems. If not, please re

29 Appendix B Regulatory Information U.S. FCC Part 15 Emissions Statement This equipment has been tested and found to comply with the limits fo

__________________________________________________________

_________________________________________________________30 vance notice isn't practical, it may disconnect the service first and notify you as s

31 quelconque de dispositifs, à la seule condition que la somme d'indices d'équiva-lence de la sonnerie de tous les dispositifs n&apo

2006/95/EC - LVD EN60950-1:2001/A11:2004 EMC/RF: 2004/108/EC EN55022:1998/A1:2000/A2:2003 EN55024:1998/A1:2001/A2:2003 Director, Hardware Engineer

3578-A 27598 ©2008 Appendix C Future Reference Information We recommen

_________________________________________________________4 Introduction This User Guide expands the Quick Start included with your mo-dem package and

5 1 Installing Your PCI Express Modem If your computer already has an internal PCI modem in-stalled, you should remove the modem and its driver

_________________________________________________________6 Windows Vista: If the AutoPlay dialog opens, select Run setup.exe. If the User Account Cont

3 On the back of your computer, unscrew and remove the metal cover plate that lines up with an empty PCIe slot. Save the screw. Electrostatic Dischar

_________________________________________________________8 If you do not use the supplied telecommunications cord, use an equivalent (minimum AWG 26

9 Dial-up Networking Users: From your computer’s desktop, dou-ble-click Computer or My Computer, then select the Network icons and tasks that l