Zoom Tri Metal TM-01 Specifications download pdf (Page 6)

ZOOM G2.1u

Using the Tuner

B P

Switch to bypass or mute

Setting the G2.1u to the bypass

In play mode, press both [W]/[Q] foot

switches together briefly and release.

Setting the G2.1u to the mute state

In play mode, press both [W]/[Q] foot

switches together and hold for at least 1

second.

When you press both [W]/[Q] foot switches together while

playing your instrument, the bypass/mute condition is

activated. However, the sound may change momentarily

just before the condition is activated. This is because the

G2.1u switches to the next higher or lower patch when one

of the foot switches is pressed slightly earlier. (When you

cancel the bypass/mute condition, the original patch

number will be active again.)

This kind of behavior is not a defect. It is due to the very

high speed at which the G2.1u responds to patch

switching. To prevent the sound change caused by the

above condition, do not produce sound with your

instrument until the bypass/mute condition is fully

established.

Play the string to tune

Play the open string to tune,

and adjust the pitch.

The left side of the display shows the

note which is closest to the current pitch.

Patch change at bypass/mute

The G2.1u incorporates an auto-chromatic tuner. To use the tuner function, the built-in effects must be

bypassed (temporarily turned off) or muted (original sound and effect sound turned off).

Using the Tuner

ZOOM G2.1u

4 0

NOTE

Pitch is high Pitch is correct

Indication turns faster the more

the pitch is off

Pitch is low

Tune other strings in the

same way.

The right side of the display shows a

symbol that indicates by how much

the tuning is off.

When you turn the G2.1u off and on

again, the reference pitch setting will be

reset to 40 (center A = 440 Hz).

Adjusting the reference pitch of the tuner

Return to play mode

Turn Parameter knob 1.

While the reference pitch value is shown, turn

Parameter knob 1 to adjust it.

Press one of the [W]/[Q] foot

switches.

If required, you can fine-adjust the reference pitch of the G2.1u tuner.

The default setting after power-on is center A = 440 Hz.

The current reference pitch is shown.

The adjustment range is 35 – 45 (center A = 435 to 445 Hz).

When you release the Parameter knob, the

display indication will return to the

previous condition after a while.

1 2 3 4 5 6 7 8 9 10 11 ... 24 25

Comments to this Manuals

No comments

Zoom Tri Metal TM-01 Specifications Page 6

Comments to this Manuals

Related products and manuals for Guitar accessories Zoom Tri Metal TM-01