Zoom Ethernet User Manual download pdf

 If you want to connect additional computers/devices using the

modem/router’s Ethernet/LAN ports, please see Read This Only if You

Are Connecting Additional Computers and/or Other Devices to the

Cable Modem/Router’s Ethernet ports.

Port Description

GE 1-4

Four 10/100/1000 auto-sensing RJ-45 ports.

Connect devices on your LAN (Local Area

Network) such as a computer, hub or switch to

these ports.

(Gigabit Ethernet 1-4

also known as LAN

1-4)

CABLE MODEM/ROUTER WITH

 If you want to configure advanced options, please refer to the User Manual

on the CD.

WIRELESS-N QUICK START

The USB port is for manufacturer’s use only.

USB

This Quick Start describes how to connect the Cable Modem/Router with Wireless-

N to a cable modem service as an Internet gateway for computers and/or other local

wireless or Ethernet-capable devices. More detailed information, including

information about advanced features, is in the User Manual on the CD.

How to connect to a computer if you don’t have or choose

not to use a cable modem starter kit

Use this button in the unlikely event that you

want to restore the default factory settings. This

button is recessed to prevent accidental resets of

your cable modem/router.

RESET

1 Be sure your computer is on and the cable modem is unplugged.

Package Contents

Note: Please refer to the Hardware Connection section if you would like to see

a diagram of the back of the cable modem and a description of the connections

as you read the following steps.

Connect your coaxial cable line to this port.

Cable

• Cable modem/router

Connect the supplied power cord to this port.

AC IN

• Power cord

2 Connect one end of the coaxial cable to the cable outlet or splitter. Connect the

other end of the coaxial cable to the Cable connector on the rear panel of the

cable modem. Hand-tighten the connectors to avoid damaging them.

• Ethernet RJ-45 cable

Connecting the Cable Modem/Router Wirelessly to Some Device

• CD with User Manual

Your cable modem/router has wireless-N for WiFi

compatible connection to your

computer and/or other devices. The cable modem/router comes set up by default

with WPA/WPA2 security, and this can be changed if you like.

¾ You can connect a coaxial cable between an open cable service wall jack

and the cable modem. (If no wall jack is available, you can use a coaxial

T connector or splitter.)

Before Installing Your Cable Modem

Your cable service provider needs to know your modem's MAC ADDRESS, which is

printed on a label on the bottom of your modem. You can provide this when you

order cable modem service; or if you already ordered service, by calling the cable

company BEFORE installing your modem. You may also be asked for your cable

modem's model name and number, which is ZOOM 5350. If you need the modem's

serial number, you can find it near the MAC address on the modem's label.

For those computer(s) and/or device(s) that support WPS, see Using WPS to set

up your wireless network. (Windows 7 SP1 (Service Pack 1) or the latest updates,

or Windows Vista SP2 (Service Pack 2) support WPS.) For those computer(s)

and/or device(s) that do support WPA/WPA2 but that don’t support WPS, enter the

default SSID and Pre-Shared Key below in the wireless network portion of the

device’s configuration menus.

¾ Alternatively, there may already be a coaxial cable that is connected to

service and that has an open end for connecting to the cable modem.

3 Plug the power cord into the AC IN connector on the rear panel of the cable

modem and into the electrical outlet. This turns the cable modem on. Check if

the Power LED lights up.

4 For initial setup we recommend that you connect the provided Ethernet cable to

any Gigabit Ethernet port (GE / LAN 1, 2, 3, or 4) on the rear panel of the

cable modem/router and connect the other end to the Ethernet port on your

computer. If you want to connect your computer wirelessly instead, see

Connecting the Cable Modem/Router Wirelessly to Some Device.

Note: Typically, tablets like the iPad and e-readers don’t support WPS but do

support WPA/WPA2.

System Requirements

• You need to connect the cable modem to a cable modem service that uses any

of the popular DOCSIS standards – 3.0, 2.0, or 1.1. If you need to get cable

modem service, please speak with your cable service provider.

Default Wireless Security Settings

™

• To use this Quick Start, you need a computer, an iPad

or another tablet.

The default SSID is: ZOOM

Note: Allow 5 to 30 minutes to power up the first time because the cable

modem must locate and connect to the appropriate channels for

communication. You’ll see the DS, US, and/or Online modem lights flashing

until the Online light stays steady green to signal success.

The default Pre-Shared Key is: zoom#### where #### represents

If your cable service provider provided a cable modem starter kit, please continue

below. If you don’t have or choose not to use the cable modem starter kit from your

service provider, go to How to connect to a computer if you don’t have or

choose not to use a cable modem starter kit.

the last 4 characters of the Cable MAC address of the unit, which

can be found on the label on the bottom of the cable modem/router.

Note: If you want to change the default SSID and Pre-Shared Key, please refer

to the User Manual on the CD for instructions.

Now open your browser and go to a familiar Web site to check that the cable

modem is working.

If your cable service provider provided a cable modem starter kit

Some cable service providers supply a cable modem starter kit that can be useful

when you install your cable modem. The kit may include a coaxial cable for

connecting between a wall jack and your cable modem. (These are also available at

most electronics retailers.) The kit will include instructions, and may also include a

CD with software. If you receive a kit like this, we recommend that you read the kit’s

instructions and use them to install your Zoom cable modem/router. This modem is

DOCSIS 3.0 certified by CableLabs, and connects like a normal cable modem.

In the unlikely event that one or more of your devices only supports WEP security, please

refer to the User Manual on the CD for instructions on how to configure WEP security.

 If you want to connect the modem/router wirelessly to some device, see

Connecting the Cable Modem/Router Wirelessly to Some Device.

Using WPS to set up your wireless network

 If you want to connect additional computers/devices using the

modem/router’s Ethernet/LAN ports, please see Read This Only if You

Are Connecting Additional Computers and/or Other Devices to the

Cable Modem/Router’s Ethernet ports.

If all the WiFi compatible wireless devices on your network support WPS:

1 Press the WPS LED pushbutton on the front panel of the router for 5 seconds.

The WPS LED should blink green.

2 Within 2 minutes (before the WPS LED light turns off), press the WPS button on

the device that you’re linking wirelessly to the modem/router. The button may be

a physical pushbutton on the device or a button on a page of the device’s

wireless network configuration menus.

 If you want to configure advanced options, please refer to the User Manual

on the CD.

You will need to plug in the modem’s power cord, connect to cable modem service

using a coaxial cable, and then connect to a computer using either the included

Ethernet cable or the wireless feature (see Using the Cable Modem/Router to

Make a Wireless Connection).

Please note the following:

• Do not block the modem/router vents in any way.

3 Congratulations! You should now have a secure connection between the

router and a device. Now is a good time to check that your device’s Internet

connection is working. Open your browser and go to a familiar Web site. If you

are able to connect, continue with the next step below.

• Do not use the modem where it’s very hot or very cold.

Note: Please refer to the Hardware Connection section if you would like to see a

diagram of the back of the cable modem and a description of the connections.

• Place the cable modem/router in a vertical orientation (using the “feet” at the bottom

of the unit to create a stable placement). The Power LED on the front panel should

be at the top of the unit.

After you have installed your cable modem and it has synchronized itself with the

cable network, your cable modem can connect your computer to the Internet.

Troubleshooting Tips

If you are not able to connect to the Internet, go to

Hardware Connection

4 If you have other devices whose WPS security you need to set, repeat steps 1

through 3 for each device. When they are all set, go to step 5.

Note: Allow 5 to 30 minutes to power up the first time because the cable

modem/router must locate and connect to the appropriate channels for

communication. You’ll see the DS, US, and/or Online modem lights flashing until the

Online light stays steady green to signal success.

5 Your basic setup for local wireless devices is complete.

Note: If you want to change the default SSID and Pre-Shared Key, please refer to

the User Manual on the CD for instructions.

Now open your browser and go to a familiar Web site to check that the cable

modem is working.

Read This Only if You Are Connecting Additional Computers and/or

Other Devices to the Cable Modem/Router’s Ethernet/LAN ports

GE/ LAN 1-4 USB RESET Cable AC IN

 If you want to connect the modem/router wirelessly to some device, see

Connecting the Cable Modem/Router Wirelessly to Some Device.

You can plug up to four computers, game consoles, or other Ethernet-capable devices into

the cable modem’s LAN ports. For information about your specific device, please refer

1 2

If You Need Help 2

Summary of Contents

Page 1

 If you want to connect additional computers/devices using the modem/router’s Ethernet/LAN ports, please see Read This Only if You Are Connecting A

Page 2 - If You Need Help

to the documentation that came with that device. Follow the instructions on the other side of this Quick Start for each computer or other device. 1 I

Zoom Ethernet User Manual

Browse online or download User Manual for Networking Zoom Ethernet. Zoom Ethernet User manual

Summary of Contents

More documents for Networking Zoom Ethernet

Comments to this Manuals

Zoom Ethernet User Manual

Browse online or download User Manual for Networking Zoom Ethernet. Zoom Ethernet User manual

Summary of Contents

More documents for Networking Zoom Ethernet

Comments to this Manuals

Related products and manuals for Networking Zoom Ethernet