Zoom B1X Specifications download pdf (Page 5)

ZOOM B1/B1X

Using the Tuner

Switch to bypass or mute

Setting the B1/B1X to the bypass state

In play mode or rhythm mode (→ p. 10),

press both [W]/[Q] foot switches

together briefly and release.

Setting the B1/B1X to the mute state

In play mode or rhythm mode (→ p. 10),

press both [W]/[Q] foot switches

together and hold for at least 1 second.

Tune your instrument

Play the open string to tune,

and adjust the pitch.

The left side of the display shows the

note which is closest to the current pitch.

NOTE

The bypass or mute condition cannot be

activated when the unit is in edit mode.

Patch change at bypass/mute

When you press both [Q]/[W] foot switches together while

playing your instrument, the sound may change momentarily

just before the bypass/mute condition is activated. This is

because the B1/B1X switches to the next higher or lower

patch when one of the foot switches is pressed slightly

earlier. (When you cancel the bypass/mute condition, the

original patch number will be active again.)

This behavior is not a defect. It is due to the very high speed

at which the B1/B1X responds to patch switching. To

prevent the sound change caused by the above condition,

do not produce sound with your instrument until the

bypass/mute condition is fully established.

The B1/B1X incorporates an auto-chromatic tuner. To use the tuner function, the built-in effects must be

bypassed (temporarily turned off) or muted (original sound and effect sound turned off).

Using the Tuner

ZOOM B1/B1X

NOTE

Pitch is high Pitch is correct

Indication turns faster the more the pitch is off

Pitch is low

Tune the other strings in the

same way.

The right side of the display shows

a symbol that indicates by how

much the tuning is off.

When you turn the B1/B1X off and on

again, the reference pitch setting will be

reset to 40 (center A = 440 Hz).

Adjusting the reference pitch of the tuner

Return to play mode

Turn the [VALUE] knob.

While the reference pitch is shown, turn

the [VALUE] knob to adjust the value in

the range from 35 - 45 (center A = 435 to

445 Hz).

Press one of the [W]/[Q] foot switches.

If required, you can fine-adjust the reference pitch of the B1/B1X tuner.

When you turn the [VALUE] knob in the

bypass/mute condition, the current reference pitch

is shown for a time on the display. The default

setting is 40 (center A = 440 Hz).

Shortly after you release the [VALUE] knob, the

display indication will revert to the previous

condition.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments

Zoom B1X Specifications Page 5

Comments to this Manuals

Related products and manuals for Guitar accessories Zoom B1X