Zoom RhythmTrak RT-323 Specifications Page 4
- Page / 59
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Getting Connected
7
RT-323 rear
Getting Connected
6
For mono playback, connect only the
[L/MONO OUT] jack. To selectively
use the output signal for certain
instrument sounds only, connect a
cable to the [SUB OUT 1/2] jack.
When a guitar or other instrument is connected to
the [LINE IN] jack, the sound from the instrument
is mixed with the sound of the RT-323 and output
from the [L/MONO/R OUT] jack.
To synchronize the RT-323 with an external
sequencer or to control the sound sources of
the RT-323 from an external MIDI component,
link the MIDI OUT connector of the equipment
with the [MIDI IN] connector on the RT-323.
To play an external MIDI component
from the RT-323, connect the [MIDI
OUT] connector of the RT-323 to the
MIDI IN connector of the external
component.
By connecting the optional foot pedal
FP01 or FP02 to the [CONTROL IN
1]/[CONTROL IN 2] jack, pitch, volume,
or sound can be controlled with the
pedal.
Connecting the optional foot switch
FS01 to the jack allows activating a
sound or switching the tone with your
foot.
Drum sound
source module
FP01/FP02
FS01
Headphones
Multi-effect
(ZOOM 505II etc.)
Guitar
LINE IN
L/MONO
OUT
R
OUT
PHONES
DC IN
CONTROL
IN 1
CONTROL
IN 2
SUB
OUT 1
SUB
OUT 2
MIDI
IN
MIDI
OUT
Bass
Mixer, audio system,
or other playback equipment
MIDI sequencer
(computer MIDI interface)
AC adapter
Getting Connected
The RT-323 can be powered from six IEC R6 (size AA) batteries. Follow the steps below to insert
the batteries.
After connections are established, check the sound by performing the following steps.
While the playback system is still turned off and the volume is fully turned down,
double-check whether all connections have been made correctly.
Turn power to the RT-323 on.
Connect the supplied AC adapter to the [DC IN] connector and set the [POWER] switch to
ON.
Turn power to the playback system on and adjust the volume.
While tapping a pad to produce sound, adjust the [OUTPUT] dial of the RT-323 and the
volume control on the playback system to a suitable position.
3
2
1
Using the Unit on Batteries
Preparations for Playback
Turn the unit over and open the battery
compartment cover.
1
Insert six fresh IEC R6 (size AA)
alkaline batteries.
2
Close the battery compartment cover.
3
If the LED lights up while the unit is powered from batteries, the batteries are exhausted.
Replace the batteries as soon as possible.
Six IEC R6 (size AA)
- OPERATION MANUAL 1
- Safety Precautions 2
- Usage Precautions 2
- Names of Parts 3
- Getting Connected 4
- Drum Kits and Bass Programs 5
- To Start the Demo Song 5
- To Stop the Demo Song 5
- To Leave the Demo Mode 5
- Playing a Bass Program 6
- Playing a Drum Kit 6
- Changing the Tempo 7
- Stopping the Pattern 7
- Patterns and Tracks 7
- Playing a Pattern 7
- Changing the Pattern 7
- To Start Recording 8
- To Stop Recording 8
- Releasing the Pad 9
- To Terminate Groove Play 9
- To Use Groove Play 9
- To Play a Pattern with a Pad 9
- Hands-on Lessons 10
- Transposing the bass track 11
- Entering a fill-in pattern 12
- Lesson 2 Editing a Song 13
- Changing the bass track 14
- Playing the Pads 16
- Drum Kit Operation 17
- Adjusting the Pad Sensitivity 17
- Copying a pad setting 18
- Bass Program Operation 19
- Application Guide [Patterns] 21
- Real-Time Pattern Input 22
- Pads 1 - 13 23
- Hold down Hold down 23
- Pattern Step Input 24
- Copying a Pattern 25
- Deleting a Track 25
- Deleting a User Pattern 25
- Changing Pattern Settings 26
- Current setting 27
- Current settingCurrent track 27
- Application Guide [Song] 28
- Real-time Song Input 29
- Recording a pattern sequence 30
- Song Step Input 31
- Measure Beat 32
- Setting value 34
- Event type 34
- Song Track Operation 35
- Copying a Song 35
- Deleting a Song 35
- Copying Specific Measures 35
- Deleting a song track 36
- Editing Song Settings 37
- Formatting a SmartMedia Card 38
- Data type to import 39
- Import source file 39
- File name 39
- [ENTER] key 40
- (pattern export) 41
- Application Guide [MIDI] 43
- SettingTrack 44
- Currently selected 44
- MIDI Track Operation 46
- Metronome Operation 47
- Troubleshooting 48
- Reference 49
- Bass Program List 50
- Instrument List 50
- Drum PAD NOTE# List 50
- MIDI NOTE # List 50
- Preset Patterns 52
- MIDI Implementation 56
- MIDI Implementation Chart 57
- ZOOM CORPORATION 59
© 2020, manymanuals.com. All rights reserved. | 0.106 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals