Zoom RT-123 User Manual download pdf (Page 7)

After connections are established, check the sound by performing the following steps.

If cables are plugged in while power is turned on, or if the system is

turned on with the volume control turned up, speaker damage may

occur.

Connect the supplied AC adapter to the [DC IN] connector and set the

[POWER] switch to ON.

While tapping a pad to produce sound, adjust the [VOLUME] control

of the RT-123 and the volume control on the playback system to a

suitable position.

Names of Parts

ZOOM

CORPORATION

MADE IN JAPAN

FOOT SWLINE INL/MONO

OUTPUT

RPHONESVOLUME MIDI IN

POWER

ON OFF

DC9V300mA

DC INPUT

FS01

Headphones

Playback connection

(mixer, audio system,

boom box etc.)

Connection to MIDI sequencer/computer MIDI interface

AC adapter

For mono playback,

connect only the

[L/MONO] jack.

When a guitar or other

instrument is connected

to the RT-123, the sound

from the instrument is

mixed with the sound of

the RT-123 and output

from the [L] and [R] jacks.

When wishing to synchronize the

RT-123 with an external sequencer

or to control operation of the RT-123

from an external MIDI component,

link the MIDI OUT connector of the

equipment with the [MIDI IN]

connector on the RT-123.

Connection to

multi-effect

(ZOOM 503 etc.)

Guitar,

bass etc.

Connecting the

optional foot switch

FS01 allows for

example activating a

sound or switching

between two

different sounds.

STEP

Turn power to the RT-123 on.

STEP

While the playback system is still turned off and the volume is fully turned down,

double-check whether all connections have been made correctly.

Getting Connected

STEP

Turn power to the playback system on.

Preparations

POWER

ON OFF

DC9V300mA

PAD

VOLUME

1 2 3 4 5 6 7 8 9 10 11 12 ... 71 72

Comments to this Manuals

No comments

Zoom RT-123 User Manual Page 7

Comments to this Manuals

Related products and manuals for Musical Instruments Zoom RT-123