15
Turning the power on & o/Seng the date & me
Turn the power ON to
start the unit
Turning the power on & off/Setting the date & time
Follow these precautions for starting-up and shutting down the unit.
Follow these instruction to set the date and time for files and data.
1
Press
Turning the power on and off
Setting the date and time
TOOL > SYSTEM > DATE/TIME
1) Make sure all the equipment is OFF.
2) Confirm that the power, the instru-
ments and the monitoring system (or
headphones) are correctly connected.
2
In order, turn connected instruments
and the monitoring system ON.
1
1
NOTE
●
Before turning the
POWER ON
, turn down
the
PHONES
and
OUTPUT
controls and
volume on monitors and other connected
devices.
●
If no power is supplied to the for more
than a minute, the DATE/TIME setting will
be reset to the default value.
If this message appears
• The DATE/TIME setting has been set to its default
value. Set the DATE/TIME again.
Slide to
ON
Turn the power OFF to
shut down the unit
Slide to
OFF
Press
Select
SYSTEM
.
2
Change menu
Select
DATE/TIME
.
3
Press
Change menu
Press
5
Select OK.
Move cursor
Change value
4
Select the date and time units and set
their values in order.
YEAR → MONTH → DAY →
(hours) → (minutes) → (seconds)
Change unit
Comments to this Manuals