Zoom 8080 Specifications download pdf (Page 10)

The 8080 has the following three main operation modes:

• Play mode •••••••••••• In this mode, you select patches and use them for playing. You can also

temporarily turn effects off, tune your instrument, and perform some other

functions.

• Edit mode •••••••••••• In this mode, you can edit (change) the parameters of the effect modules in

the currently selected patch.

• Utility mode ••••••••• In this mode, you can make amp simulator, MIDI, and other settings which

affect all patches.

Besides the above mentioned main operation modes, the 8080 also has a manual mode for turning effect modules off and on

with the foot switches during a performance, and the so-called initialize mode for resetting the unit to the factory defaults.

Preparations

Modes

HINTHINT

9 ■

Basic Operation

Turn power to the amplifier(s) off

and set the volume to minimum.

Connect the 8080 to the instrument,

amplifier(s) etc.

Plug the AC adapter of the 8080 into

an AC outlet.

Set the INPUT GAIN SELECT switch

on the rear panel of the 8080 to a

position which matches the output

level of the guitar.

Recommended switch settings are as

follows. Guitars with single-coil pickups:

"H", guitars with hum-bucking type

pickups: "M", guitars with active type

pickups: "L".

Turn the 8080 on.

Turn the amplifier(s) on.

Adjust the OUTPUT control of the

8080 to a suitable position and

adjust the level controls on the

instrument and the amplifier(s).

Use the PRESENCE control on the

8080 to adjust the timbre.

INPUT GAIN

HML

POWER

PRESENCE

OUTPUT

The settings of the OUTPUT and PRESENCE controls are not memorized.

For turning the equipment off, reverse the above sequence.

✎

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 70 71

Comments to this Manuals

No comments

Zoom 8080 Specifications Page 10

Comments to this Manuals

Related products and manuals for Music Pedal Zoom 8080